Mercedes-Benz CLA-Class C118 common faults.

The wheel bolts were not tightened in accordance with the torque specifications. The bolts and the wheel assembly could detach while the vehicle is in motion, increasing the risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: 18/05/2026

The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling one 2020 CLA250 vehicle. The power supply connection to the electric power steering may have been contaminated with melted adhesive, which can cause the power steering assist to fail while driving.

Risk: A sudden loss of power steering assist can increase the risk of a crash.

Remedy: A dealer will inspect and repair the power supply connection, as necessary, free of charge. The owner notification letter was mailed January 21, 2021. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2021120016.

The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2021 A220, A35 AMG, and CLA250 vehicles. The child seat anchoring system (ISOFIX) may be missing the right-side anchoring bar from the ISOFIX bracket on the right-rear seat.

Risk: If the anchoring bar is missing from the ISOFIX bracket, the child restraint cannot be properly secured to the seat using the ISOFIX securing system, increasing the risk of injury for a child in that seat.

Remedy: MBUSA will notify owners, and dealers will inspect the right-rear ISOFIX bracket and replace the bracket, if necessary, free of charge. The recall began March 16, 2021. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2021020004.

The authority's notice

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2019 CLA250 and CLA250 4MATIC vehicles. The right side door locks may not have been properly manufactured. As a result, the right-side doors may not be able to be opened from outside of the vehicle.

Risk: In the event of a crash, if the right side doors cannot be opened from the outside, it could increase the risk of injury.

Remedy: MBUSA will notify owners, and dealers will replace the door locks, free of charge. The recall began May 3, 2019. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2019030020.

The authority's notice

A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The four self-locking nuts used to attach the airbag might not have been correctly tightened. As a result, in the event of an accident in which the airbag was deployed, it could become detached from its base plate, failing to provide its restraining effect and increasing the risk of injuries.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The connection of the power supply to the electrical power steering may have been contaminated by heat-activated adhesive. Ageing of this adhesive could lead to a loss of clamping force and thus to a loose connection that may lead to interruption of the power supply. As a result, the electrical power steering could fail spontaneously, even while the vehicle is in motion, increasing the risk of an accident. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The right-hand bracket on the right-hand rear seat designed to attach the child seat to the ISOFIX anchor point may be missing. As a result, there would be no restraining effect provided by the ISOFIX lower anchorage system and the child seat would not be sufficiently secured, increasing the risk of injury in the event of an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Improper torque of the screws on the brake caliper housing can cause the screw connections to become loose. As a result, the braking performance would be reduced and components of the brake caliper may be lost, increasing the risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate and the panel could become detached from the vehicle, posing a risk to other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Update of the electric steering software Date of entry into force: Unknown Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Due to a defect in the high fuel pressure manifold the engine might be damaged. This may lead to reduced engine power and to inability to start the vehicle, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Importer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A fuel pipe connection of the inerting system may be defective. As a result, it may allow fuel to leak out in the event of an accident, increasing the risk of fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

One of the lateral crash sensors is not attached correctly and may not record correct values in the event of a side-impact crash. As a result the lateral airbag may not be properly inflated, increasing the risk of injury to the occupants.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The tyres may not meet specifications, which can cause a sudden loss of air pressure. This can affect the stability of the vehicle while driving, creating a risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The oil-supply pipe on the turbocharger may leak. As a result, engine oil could leak onto the under-body paneling and from there onto the road, posing a risk to the following traffic. Moreover, leaking engine oil might come into contact with hot components in the engine compartment, increasing the risk of fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The fitted tyres may not meet the load requirements and could be damaged while the vehicle is being driven. This could cause an accident and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The pyrofuse casing may move while the vehicle is in motion, potentially damaging cables. As a result, the pyrofuse could fail during an accident or cause the separator piston to dislodge into the driver’s footwell, increasing the risk of injury. Additionally, in plug-in hybrid and electric vehicles, cable damage could lead to high-voltage system failure and loss of power without warning, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The 48V wiring harness is not connected in accordance with specifications. This may lead to a build-up of heat resulting in a fire. Protection against contact is not guaranteed, which increases the risk of electric shock. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A gasket is lacking between the exhaust manifold and the exhaust gas turbocharger. This can lead to hot, unpurified exhaust gas seeping out between the turbocharger and the manifold. This can damage the cylinder head cover and cause an oil leak. If the oil come into contact with hot engine parts, the vehicle can catch fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The length of the brake hoses on the rear axle is incorrect. The rear axle’s brake hoses can come into contact with surrounding components, chafe over time, and leak brake fluid. This can lead to reduced braking performance in one of the two brake circuits and increase the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A washer for the front safety belts may not correspond to specifications and could not withstand the loads. In the event of an accident, the restraining effect could be incomplete, increasing the risk of injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The driver/passenger seat belt buckles may not meet the specifications. As a result, the seat belt may not provide sufficient protection in the event of a frontal impact, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The wiring harness near the “D” pillar may be damaged by adjacent components. This can disable the window bag, reducing occupant protection in a crash. The damage may also increase electrical resistance, creating a potential hotspot and a possible fire risk. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Defective side curtain airbag fabric may reduce airbag protection and therefore increase the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The screw attachments of the front seats and/or belt buckles are insufficient. This could impair their restraining effect. This increases the risk of accident and injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice