Mercedes-Benz E-Class W213 common faults.

The wheel bolts were not tightened in accordance with the torque specifications. The bolts and the wheel assembly could detach while the vehicle is in motion, increasing the risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: 18/05/2026

The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2021-2023 CLS450, E450, E450 All-Terrain, AMG E53, AMG GT43, AMG GT53, and 2021 AMG CLS53 vehicles. The 48-volt ground cable connection located in the engine compartment may not be tightened properly and may result in the ground cable overheating.

Risk: An overheated ground cable increases the risk of a fire.

Remedy: Dealers will inspect the 48-volt ground cable connection and repair it as necessary, free of charge. Owner notification letters were mailed March 22, 2024. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2024MMNNNN.

The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2019-2022 CLS450 Coupe and AMG E53, 2019-2021 AMG CLS53 Coupe, and 2021-2022 E450 vehicles. The 12-Volt battery in the trunk may not be properly secured, which, in the event of a crash, can cause electrical connection failure, disabling various safety features including, emergency call (eCall) system, electric seat adjustment, hazard warning lights, and automatic door locks.

Risk: The inability to operate safety features (eCall system, hazard lights, electric seats, or automatic door locks) can increase the risk of injury during a crash.

Remedy: Dealers will secure the 12V battery, free of charge. Owner notification letters were mailed January 20, 2023. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2022100009.

The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2021-2022 C-Class, E-Class, S-Class, SL, EClass Coupe/Convertible, CLS, AMG GT 4-doors Coupe, and EQS vehicles with a heated leather steering wheel. Due to a software error in the hand detection control unit, the hands-off detection might not detect when the driver's hands are away from the steering wheel when using the Active Distance Assist DISTRONIC system.

Risk: Deactivated hands-off detection will prevent DISTRONIC system features from functioning, including warnings to grab the steering wheel and calling first responders as part of the Active Emergency Stop Assist, which can increase the risk of a crash or injury.

Remedy: Dealers will update the hand detection control unit software for the DISTRONIC system, free of charge. Owner notification letters were mailed May 6, 2022. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2022040010.

The authority's notice

In certain vehicles with a calliper disc-brake system, the bolts of the brake callipers on the front axle may not meet the specifications. A brake calliper can detach during braking, which may lead to braking power being reduced and components being lost. That would increase the potential risk of accidents, including for the following traffic. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Distributor Category of measure(s): Recall of the product from end users Date of entry into force: 02/11/2021

The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2021 C300 Cabriolet, C43 AMG Cabriolet, C63 AMG Cabriolet, C63 AMG S Cabriolet, E450 Cabriolet, and E53 AMG Cabriolet vehicles. The rear headrests may be incorrectly mounted to the seatbacks.

Risk: Incorrectly mounted headrests could move or detach from the seat during a crash, increasing the risk of injury.

Remedy: Dealers will inspect the rear seatback guide bushings and replace them if necessary, free of charge. Owner notification letters were mailed July 16, 2021. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2021060010.

The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2021 E350, E450, E450 Wagon, and AMG E63 vehicles. The parking control unit may fail to display the rearview camera image and cause the parking sensors to misidentify or fail to detect objects.

Risk: An inoperative rearview camera display and/or parking sensors can reduce the driver's view and awareness of what is behind the vehicle, increasing the risk of a crash.

Remedy: All affected vehicles are still within MBUSA's control. MBUSA will replace the parking control unit, free of charge. The recall began April 8, 2021. Owner may contact MBUSA customer service at 1-800-367-6372.

The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2021 E350, E450, E450 Wagon, E63S AMG, 2020 E63S AMG Wagon, and 2020-2021 E53 AMG vehicles. The passenger seat limiter may allow the seat to be positioned too close to the air bag.

Risk: A seat too close to the air bag increases the risk of injury in the event of a crash necessitating the deployment of the frontal passenger air bag.

Remedy: MBUSA will notify owners, and dealers will recalibrate the passenger seat limiter, free of charge. The recall began April 29, 2021. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2021040002.

The authority's notice

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2021 E350 and E450, 2019-2021 AMG E53 and 2020-2021 AMG E63 vehicles. The front passenger seat may be missing the mechanical seat adjustment range limit stop, allowing the seat to move outside of the acceptable range in relation to the air bag.

Risk: If the front passenger seat is adjusted beyond the acceptable range in relation to the air bag, there could be an increased risk of injury in the event of a crash with air bag deployment.

Remedy: MBUSA will notify owners, and dealers will inspect for the mechanical seat adjustment range limitation for the front passenger seat and install it if necessary, free of charge. The recall began December 18, 2020. Owners may contact MBUSA customer service at 1-800-368-6372. MBUSA's number for this recall is 2020110013.

The authority's notice

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2020 E450 Coupe vehicles. The front left seatbelt may be improperly installed, potentially allowing the seatbelt to contact sharp metal components and damage the seatbelt webbing.

Risk: A damaged seatbelt may not properly restrain an occupant, increasing the risk of injury in the event of a crash.

Remedy: MBUSA will notify owners, and dealers will inspect and reroute the front left seatbelt as necessary, or replace it if the webbing is damaged, free of charge. The recall began May 22,2020. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2020050001.

The authority's notice

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2019 E53 AMG 4MATIC, E63 AMG 4MATIC Wagon, and E63S AMG 4MATIC Wagon vehicles. The incorrect driver air bag and software version may have been installed.

Risk: Incorrect driver air bag and software version can cause the restraint systems to not function as intended during a crash, increasing the risk of injury.

Remedy: MBUSA will notify owners, and dealers will inspect and, as necessary, replace the driver's air bag and update the air bag software, free of charge. The recall began April 16, 2020. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2020030001/2.

The authority's notice

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2019 E450 4MATIC Wagon, 2017-2018 E400 4MATIC Wagon, and 2018-2019 E63S 4MATIC Wagon vehicles. The rear spoiler may detach.

Risk: If the spoiler detaches while driving, it can become a road hazard, increasing the risk of a crash.

Remedy: MBUSA will notify owners, and dealers will inspect and correct the mounting of the spoiler, as necessary, free of charge. The recall began October 18, 2019. Owners may contact MBUSA customer service at 1-800-367-6372. Note: This recall is an expansion of NHTSA recall number 18V-849. MBUSA's number for this recall is 2019090008.

The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2019 Mercedes-Benz E450 4Matic Wagon and E63S AMG Wagon vehicles. The affected vehicles have a tailgate mounted spoiler that may not be properly attached and therefore could detach while driving.

Risk: If the tailgate mounted spoiler detaches while driving, it can become a road hazard, increasing the risk of a crash.

Remedy: MBUSA will notify owners, and dealers will inspect and correct the mounting of the spoiler, as necessary, free of charge. The recall began December 19, 2018. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2018120002.

The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2018 Mercedes-Benz E300, E300 4Matic, E43 AMG 4Matic, E400 4Matic, E63S AMG 4Matic+, and 2019 CLS450 4Matic vehicles. The Occupant Classification System (OCS) may not be properly calibrated, resulting in the front passenger air bag not being deactivated if a child seat is in the front seat.

Risk: If a child seat is in the front seat and the passenger air bag is not deactivated, in the event of a crash, it can increase the risk of injury.

Remedy: MBUSA will notify owners, and dealers will replace the front passenger seat cushion, free of charge. The recall began November 26, 2018. Owners may contact MBUSA customer service at 1-800-367-6372.

The authority's notice

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2017 Mercedes-Benz E300 4Matic, E300, E43 AMG, and E400 vehicles. The headlight horizontal adjustment screws on these vehicles may not be properly sealed behind a non-removable sealing cap to keep headlights from being readjusted. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk: If the headlight's horizontal aim is altered, a misaimed headlight may lead to an insufficiently illuminated roadway, which may increase the risk of a crash.

Remedy: MBUSA will notify owners, and dealers will retrofit the sealing caps for the headlights, free of charge. The recall is expected to begin in June 2018. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2018050012.

The authority's notice

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2017 E300 4Matic, E300, and E43 AMG vehicles fitted with LED headlights. These vehicles may have misadjusted headlights, possibly resulting in the low beam headlights insufficiently illuminating the roadway. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk: An insufficiently illuminated roadway may increase the risk of a crash.

Remedy: MBUSA will notify owners, and dealers will inspect the headlamp adjustment, adjusting it as necessary, free of charge. The recall began on April 3, 2018. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2018030005.

The authority's notice

The starter current limiter may be overloaded and overheat. As a consequence, the surrounding components could ignite, leading to a fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: 01/09/2017

The authority's notice

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2016 GLE300d 4Matic, E400 4Matic Coupe, GL63 AMG, GLE350, GLE350 4Matic, GLE350d 4Matic, GLE400 4Matic, GLE43 AMG Coupe 4Matic, GLE550e 4Matic, GLE63 AMG 4Matic, GLE63S AMG 4Matic and GLE63S AMG Coupe 4Matic vehicles, 2017 E300 4Matic and GLS63 AMG 4Matic vehicles, and 2016-2017 GL350 4Matic BlueTec, GL450 4Matic, and GL550 4Matic vehicles. The affected vehicles have an electric power steering connector that may be insufficiently sealed, allowing water to enter the control unit.

Risk: If water enters the power steering control unit, the power steering assist may be deactivated, increasing the risk of a crash.

Remedy: MBUSA will notify owners, and dealers will replace the connector and inspect the electric power steering rack, replacing the rack as necessary. These repairs will be performed free of charge. Remedy parts are currently unavailable. Interim notices informing owners of the safety risk are expected to be mailed June 30, 2017. Owners will receive a second notice when remedy parts become available. Owners may contact MBUSA customer service at 1-800-367-6372.

The authority's notice

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2017 E300 and E300 4MATIC vehicles. The software for the widescreen instrument cluster may cause the instrument cluster to not display anything on vehicle on startup, or the display may reset while driving. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 101, "Control and Displays."

Risk: Without the instrument cluster displaying important information such as the vehicle's speed, there would be an increased risk of a crash.

Remedy: MBUSA will notify owners, and dealers will update the instrument cluster display software, free of charge. The recall began late May 2017. Owners may contact MBUSA customer service at 1-800-367-6372.

The authority's notice

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2016-2017 E300 and 2017 E300 4MATIC vehicles. The affected vehicles have a roof mounted spoiler that may not be properly attached and thus may detach while driving.

Risk: If the roof-mounted spoiler detaches while driving, it can become a road hazard, increasing a risk of a crash.

Remedy: MBUSA will notify owners, and dealers will inspect the roof spoilers, replacing them as necessary, free of charge. The recall began June 9, 2017. Owners may contact MBUSA customer service at 1-800-367-6372.

The authority's notice

Mercedes-Benz USA LLC, (MBUSA) is recalling certain 2017 E300 and E300 4Matic vehicles. The front passenger air bag may not deploy properly if a front seat passenger is sitting on the edge of the seat or is laying in the seat with the seat reclined. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."

Risk: In the event of a crash that necessitates air bag deployment, if the air bag does not deploy as intended, there would be an increased risk of occupant injury.

Remedy: MBUSA will notify owners, and dealers will update the air bag control module software, free of charge. The recall began April 13, 2017. Owner's can contact MBUSA customer service at 1-800-367-6372.

The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2017 E300, E300 4Matic, and E43 AMG vehicles. The front passenger occupant detection control unit may have been incorrectly installed. As a result, the front passenger seat occupant may be misclassified. For example, an adult may be misclassified as a child seat, causing the front passenger air bag to be deactivated in the event of a crash.

Risk: If the passenger front air bag does not deploy as intended in the event of a crash, it can increase the risk of a injury.

Remedy: MBUSA will notify owners, and dealers will inspect the routing of the pressure hose of the seat occupancy detection control unit and replace the pressure hose and seat occupancy detection mat if necessary, free of charge. The recall began March 2017. Owners may contact MBUSA customer service at 1-800-367-6372.

The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2017 E300 and E300 4Matic vehicles. The affected vehicles may have a damaged steering column-mounted shift lever module. If the internal circuit board is damaged, moving the shift lever will not select a transmission gear.

Risk: If the vehicle does not move forward or backward as selected by the driver with the shift lever, there is an increased risk of a crash.

Remedy: MBUSA will notify owners, and dealers will replace the steering column-mounted shift lever module, free of charge. The recall began April 2017. Owners may contact MBUSA customer service at 1-800-367-6372.

The authority's notice

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain model year 2017 E300 Sedan and E300 Sedan 4Matic vehicles manufactured December 10, 2015, to June 30, 2016. In the affected vehicles, the rear bench seat frame may contact and damage the wiring harness for the fuel pump, fuel tank pressure sensor or fuel level gauge.

Risk: Damage to the fuel pump wiring may result in an engine stall, increasing the risk of a crash.

Remedy: MBUSA has notified owners, and dealers will modify the routing of the affected wiring harness, repairing it as necessary, free of charge. The recall began October 28, 2016. Owners may contact MBUSA customer service at 1-800-367-6372.

The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2016 Mercedes Benz E350, E400, E400 4Matic, E63 4M S AMG, E350 4Matic, E63-4M S AMG, 2015 CLS400, CLS400 4Matic, CLS550, CLS63-4M "P" AMG, and CLS550 4Matic vehicles manufactured April 16, 2015, to April 22, 2015. The integral steel cable that secures the rubber seal to the bulkhead might have been damaged due to the supplier rework of the rubber seal. In the event the rubber seal is not properly secured around the engine compartment, it is possible for the rubber seal to temporarily stick to the hood when it is opened and then may fall into the engine bay when the hood is closed.

Risk: If the rubber seal falls into the engine compartment, it may contact parts of the engine or exhaust system, increasing the risk of a fire.

Remedy: MBUSA will notify owners, and dealers will replace the rubber seal, in the engine compartment, free of charge. The recall began on September 2, 2015. MBUSA's number is 2015080001. Owners may contact MBUSA customer service at 1-201-573-5339.

The authority's notice

A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The latching of the electrical connector of the left acceleration crash sensor onto the cross beam may not be in line with specifications, so the electrical connector of the crash sensor might become detached as a result of vibration while the vehicle is driven or in an accident with multiple impacts. As restraint systems will not be triggered, this could reduce the restraint effect, increasing the risk of injury. The product does not comply with the requirements of the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The 48V ground cable bolt in the engine compartment may be incorrectly secured. This could increase electrical transition resistance at the point of connection. As a result, the high electrical currents that can flow through this connection could increase the temperature, increasing the risk of fire. Furthermore, the 48V electrical power supply failure may increase exhaust emissions. This could have a negative impact on the environment. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Cracks could occur in the high pressure lines between the fuel rail and the injectors. As a result, diesel fuel could leak into the engine compartment, increasing the risk of fire. Moreover, due to the fuel leak the engine might not start, or the emergency operating mode might be activated.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Moisture can penetrate into the busbar, giving rise to conductive contacts between the individual lines inside it. The resulting current flows could overheat the plastic material of the busbar, increasing the risk of fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The two interior roof grab handles on the left side in the travel direction may not have been attached correctly. As a result, a handle could become detached if a vehicle occupant holds on to it when entering or exiting the vehicle, leading to increased risk of injury.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Due to a defective screw connection, the starter motor positive cable may become damaged by the relative movements of the starter. Consequently, the cable could come into contact with the housing of the starter and cause a short circuit, which could lead to an engine stall and increased risk of fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The seat belt on the left-hand front seat may not have been fitted correctly and can be damaged by coming into contact with sharp-edged metal parts. This will impair its restraint function, increasing the risk of injury in the event of an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The rear head rests might not have been attached correctly. As a result, they could become displaced or detached from the seat in the event of an accident, increasing the risk of injury.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The screw connection of the 48 V ground connector of the coolant electric compressor may come loose and lead to improper attachment of the ground line cable head. This increases the electrical contact resistance and can cause the temperature at the connection point to increase, increasing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A fuse may be faulty, which can lead to engine failure or impairment of the restraint functions and instrument cluster. This increases the risk of an accident, injuries and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Due to a defect in the high fuel pressure manifold the engine might be damaged. This may lead to reduced engine power and to inability to start the vehicle, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Importer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The heat shielding plate on the exhaust gas turbocharger may not comply with the specifications. As a result, it can come into contact with the oil pipe of the turbocharger and damage it, leading to increased risk of fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The elastomer material of the oil feed line for the exhaust-gas turbocharger may not comply with the specification, allowing oil to leak out. Consequently, the leaking oil could come into contact with hot components, increasing the risk of fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The left-hand side, rear seat-back lock does not comply with the specifications. This could lead to a failure of the seat-back locking system in the event of an accident, increasing the risk of injury.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The driver and passenger airbags of the company Takata in vehicles with ammonium nitrate gas generators without drying agents could, under certain climate conditions, lead over time to a chemical change in the fuel. In the event of an accident triggering the release of the driver or passenger airbag, this change could cause the gas generators to burst. If a gas generator ruptures, the airbag would then have no restraining function and loose parts from the gas generator could reach the vehicle interior. This would increase the risk of injury for passengers.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet conditions and can lead to a short circuit, increasing the risk of a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose screw connection, oil might leak at the oil-supply and/or oil-return pipe of the turbocharger. The leaking oil might then come into contact with hot components, increasing the risk of fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The steering wheel may not be correctly connected with the steering gearbox. This could lead to loss of steering of the vehicle increasing the risk of accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The electrical connector of the side-impact sensors might not be correctly latched and could become detached. This would lead to delayed activation of the restraint systems in the event of a side impact, reducing their restraining effect and increasing the risk of injury to the vehicle occupants.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The bolts of the rear spoiler may have been insufficiently tightened. At higher speeds, the rear spoiler could consequently detach from the vehicle. This could cause a risk of injury for other road users.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The belt tensioner arm may have been manufactured with a borderline tolerance, which could cause one side of the V-ribbed belt to rub against the belt tensioner, causing it to fail. As a result, the coolant pump may stop working, causing the engine to overheat, thus compromising the impermeability of the oil sump. Consequently, oil may leak onto the road, posing a risk to the following traffic. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The mounting screws of the disc brake callipers on the front axle may not be in line with specifications. As a result, when braking, a disc brake calliper may detach, increasing the risk of accidents. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

There may be cracks in a securing nut in the steering gear of rear-wheel-drive vehicles. The nut could consequently break if the steering system is subject to a very high lateral force, which could result in rotating parts in the steering gear affecting the casing and thereby blocking the steering system.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the connector when the vehicle is parked, causing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A defective sensor installed within the electrical power steering system may lead to deactivation of the power steering assistance. As a consequence, there is an increased risk of accidents.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The exit warning function, which warns car occupants not to open doors when traffic is approaching, may malfunction. This creates a risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The screws securing the driver’s seat to the floor console may not be properly tightened, posing a risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The sensors in some seatbelt locks may not have been adequately manufactured. Consequently, they might not detect a correctly fastened seatbelt and thus not activate the pre-tensioner systems (electric and pyrotechnic). In the event of an accident, these might not work leading to a limited restraint capacity and increasing the risk of injury to the occupants.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

In vehicles with rear-wheel drive, a lock nut in the steering gear may be cracked. Consequently, when the steering is placed under high forces it could break, which would block the steering gear and increase the risk of accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The front passenger occupant detection control unit may have been incorrectly installed and could misclassify a passenger as a child seat. That would cause the front passenger airbag to be deactivated in the event of an accident and would thereby increase the risk of injury for the passenger.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered in the event of an accident, the airbag control unit may not recognise the belt buckle status, the engine control unit could be coded with a false maximum speed or various assistance systems may not function.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The propellant mixing ratio in certain seat-belt pre-tensioner igniters may be incorrect. As a result, in the event of an accident where the front seat-belt pre-tensioners are activated, the pre-tensioners would not provide the restraint performance required if the igniter did not ignite as intended. This could put the occupants at a greater risk of injury.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The rear door spoiler may not be secured enough due to an incorrect adhesive bond. As a result, the spoiler may become detached in motion, posing a risk to following traffic.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The seals on the front doors around the window may allow water to enter the inner door area causing damage to the door control unit. As a result, the pinch protection on the electric window regulators could be impaired or there could be a short circuit leading to a fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The mixture ratio of the fuel in the inflators of the front-passenger knee, pelvic and side curtain airbags may not be correct. In the event of an accident requiring the deployment of the airbags, this could lead to the airbags not inflating properly.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The welding of the backrests of the driver's and front passenger's seats may be defective. In the event of an accident, the welding could break, increasing the risk of injury to the occupant of the seat in question.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The bonding between the top and the lower part of the roof-mounted taxi sign may not be adequate. As a consequence, the top of the taxi sign may become detached from the lower part with a risk of accidents for other road users.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The casing material of the gas generator of the driver airbag may be defective. In the event that the airbag is deployed, the airbag may not protect the driver and detached parts might enter the passenger compartment causing injury to the vehicle occupants.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The seat-backs may not be fully secured on the right-hand side of the front seats. In the event of an accident, any unsecured objects on the rear seats of the vehicle may not be restrained, thereby increasing the risk of injury to passengers in the front seats.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Certain screw connections attaching the wiring harness to the fuse box may not have been fitted correctly. As a result, there could be excessive contact resistance at these connection points, increasing the risk of fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The fixing screws for the turbocharger oil return line and the crankcase breather pipe may have been interchanged. Due to a screw being too long, the pre-tensioning force of the screw connection may be insufficient and oil could leak from the turbocharger oil return line. As a result, oil could come into contact with hot components, increasing the risk of fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The navigation software may be faulty, storing the wrong location of the vehicle. As a result, when the emergency call system (eCall) is used, the location communicated to the emergency centre might not correspond to the actual vehicle location. In such cases, emergency services could not be directed to the vehicle.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The mixing ratio of the propellant for the seat-belt pre-tensioner igniters may be incorrect. In an accident in which the rear seat-belt pre-tensioners were activated, the igniters might not ignite as intended and the pre-tensioners would not provide the restraint performance required.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The ISOFIX console, anchoring the child seat to the car body, may not be adequate. As a result, the child seat installed in the back seat may not be anchored as intended and in the event of an accident, the child may be injured.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The lower engine compartment cover lacks the necessary left-hand gap for the exhaust system. As a result, the exhaust system temperatures resulting from operation at full load could lead to the cover catching fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The calibration of the occupant classification system for the passenger seat does not work correctly. If a child seat is installed on the passenger seat, the airbag might not be deactivated and be deployed in the event of an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The operation of the active bonnet may be faulty because of a wrong positioning of the sensor hose in the front bumper. In the event of a collision with a pedestrian, the pedestrian would not be detected and the active bonnet would not be triggered. This could increase the potential risk of injury for the pedestrian.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The steering column is not sufficiently earthed. As a result, in the event of an electrostatic discharge, the driver's airbag may be triggered when not required. This could cause an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The rear spoiler might not have been attached in accordance with requirements. As a result, the rear spoiler could become completely detached from the vehicle at high speeds, posing a risk to the following traffic.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The fixing screw connecting the base holder of the manual control device may not be correctly fitted. This can impair the control over the vehicle, increasing the risk of an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The software and hardware of the parking assistance system may be defective. This could lead to the rear camera view being impeded or failing completely. Moreover, the ultrasonic parking sensors might not detect an obstacle or not detect it correctly, leading to increased risk of an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

An improperly reworked fuse box may lead to breaks in contact or incorrect fuse ratings. Therefore, systems connected to the fuse could fail, including the vehicle losing drive without warning as well as the restraint systems or the instrument cluster being compromised. This could lead to injury or fire. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The three aluminium screws of the steering box may corrode due to exposure to spray water and aggressive road-grit (salt) used for melting ice. Advanced corrosion could weaken the screws, leading to potential breakage during manoeuvring or parking. If all fixing screws fail, the power-assisted steering could detach, resulting in a loss of power steering and an increased risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice