SR/02178/26Safety recallInjuries27 July 2026 · EU Safety Gate
A screw fastening on the driver’s seat frame may detach. In the event of an accident, the fastening may not withstand the resulting loads, which could impair the protection provided by the restraint system and increase the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 27/07/2026
The authority's notice
A12/01197/23Safety recallInjuriesno date · EU Safety Gate
The front passenger airbag may not be properly bolted, which can lead to a faulty deployment, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01592/24Safety recallInjuriesno date · EU Safety Gate
The pump motor of the ESC (Electronic Stability Control) unit may be missing all three screws and could become detached. This could lead to hydraulic brake failure, increasing the risk of an accident. In such a condition, vehicle deceleration would be possible only through the EPB (Electric Parking Brake) function. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
SR/00373/26Safety recallFireno date · EU Safety Gate
Battery cells in the high-voltage battery can show increased self-discharge due to a manufacturing error. Thermal overload may occur within the high-voltage battery, which could result in a vehicle fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
SR/00953/26Safety recallFireno date · EU Safety Gate
The high-voltage battery’s cell modules could overheat during charging. This may lead to fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
SR/03905/25Safety recallInjuriesno date · EU Safety Gate
An incorrectly installed spring pin in the differential could cause a housing rupture with an oil leak and loss of power transmission. In the event of sudden loss of power transmission, the vehicle may be difficult to control. Moreover, the leaking oil can pose a danger to following traffic. There is a risk of accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
