IV: front control arm wear (before the 2008 facelift)
It does not show up on every car. Check before you buy.
comfort
severity
not available
mileage
1
sources
1 source next to the write-up.
The fault
How you spot it
The front control arms of the pre 2008 Polo IV wear out quickly: knocking on uneven roads, uneven tyre wear, vague steering. The 9N3 built from 2008 already got the successor front suspension design, where the phenomenon is rarer. Per side it is a moderate parts and labour job, but it rarely stops at one side.
Which model
Who it affects
The card opens the generation, the engine or the transmission.
Generations and models
1 generations.
Volkswagen
IV
Polo
Volkswagen Polo IV
–2008
Checklist
IV: front control arm wear (before the 2008 facelift)
What you would check for this fault. Take it to the car.
Before you buy
Checklist
What you tick stays on this device only.
Sources
How we know
Information, not an expert opinion
We write the descriptions, and we put the source next to them. A person reviews them before they go out. They are still information, not a technical expert opinion.
- A fault on the list does not mean the car you are looking at has it.
- A fault missing from the list does not mean the model is fault-free. Write-ups are made model by model. Not all of them are done.
- You decide whether to buy. This is no substitute for an inspection. That needs a workshop and a history check.
