Audi Q7 4M common faults.

The vehicles are equipped with control software regarded as unauthorised by the competent authorities. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Importer Category of measure(s): Recall of the product from end users Date of entry into force: 23/04/2021

The authority's notice

Due to the incompatibility of the control software with the heating film used for the front camera on the windscreen, significant overheating may occur when the heating element is controlled after the ignition is switched on or at low temperatures. This may lead to a smouldering and increase the risk of the vehicle catching fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The side airbag is insufficiently secured to the front left-hand side of the seat frame. As a result, it may not be able to deploy correctly in the event of an accident, increasing the risk of injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Possible defect in the locking mechanism on the front head restraints may cause them to unintentionally shift in height when placed under pressure. This could impair the protective effect of head restraints in the event of an accident, increasing the risk of injuries.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Alteration of the rear axle’s toe and/or camber values lead to increased and uneven wear on the rear tyres, and if worn down to its carcass may suffer a sudden loss of pressure. This can lead to loss of traction and may affect vehicle handling, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The screw connection between the steering shaft and the steering box may not have been tightened sufficiently and may loosen over time. This will impair the vehicle’s steerability, increasing the risk of an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The joint on the discharge nozzle of the gas generator for the curtain airbag might have been inappropriately welded. In the event of an accident triggering the curtain air bag, the joint could fail impairing the proper inflation of the airbag, increasing the risk of injuries.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

An oil line in the automatic gearbox may have a manufacturing defect. Consequently, oil may leak out onto the road, posing a risk to the following traffic.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A defective welding seam on the front seat back frame can break in the event of an accident. As a result, the person sitting in the seat may hit their head on the B-pillar, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Differences in the mixture ratio for the initiating devices for the airbags or seat-belt pre-tensioners could lead to the airbags or seat-belt pre-tensioners not activating in the event of an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

In certain vehicles, fuel can leak onto the engine fuel rail. Fuel leakage close to a source of ignition may increase the risk of the vehicle catching fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A component of the wheel suspension may not be strong enough and could break over time. As a consequence, the tyre may press against the wheel arch which poses a risk of accidents.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Faulty crash sensors for the airbag restraint systems may have been installed in both the front doors. This could impair the protective effect of the side airbags, head airbags and/or belt tensioners, increasing the risk of injury in the event of an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The nuts on the eccentric bolt of the rear-axle spring-link control arm may break due to stress corrosion. As a result, the rear axle could move in the wrong direction, in an uncontrollable manner at high speeds.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The cell modules of the high-voltage battery could overheat during charging which can lead to a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice