vinkodex.
Engine code

N48H engine faults.

Listed as: 2.3, 2.3 Cabrio. The faults belong to this engine code. They do not apply to every car with that name.

petrol

fuel

2261 cc

displacement

233 kW (317 HP)

power

2 fault write-ups. Both are important.

Before you buy

Known faults

2 important faults

critical1

The internal clearances of the low pressure fuel pump are small, so the friction is high and the pump is sensitive to vapour lock. The cause lies with the supplier: in June 2021 it changed the manufacturing process, and the new process did not hold the dimensions reliably.

Show the rest

The fault comes out when the fuel is low, or when the tank warms up in hot weather. Fuel pressure is then lost, the engine does not get enough fuel and can stop while driving. The authority calls this a loss of motive power, and it is the most serious consequence a fault can cause while under way.

The milder sign is hesitation at part throttle and sluggish acceleration, and the fault is reported above 40 000 kilometres.

In July 2025 the maker issued a recall for it under number 25S75 (25V455 at the authority), and it covers 850 318 cars from the 2021 to 2023 model years. One thing has to be known, though: when the campaign started the final repair was not yet ready, and owners first received only an interim notice. On an affected car it is therefore not enough to ask whether the recall has been carried out; it also has to be clarified whether there was anything to carry out.

above 40,000 km

What to check

  • Ask the franchised dealer with the chassis number: is it affected by the 25S75 campaign
  • If it is affected, ask what was carried out on it, and ask for proof of it
  • Watch for hesitation at part throttle and sluggish acceleration on the test drive
2 more steps in the write-up

expensive1

The block of the engine is of open deck design: the cylinder walls are not braced at the top. Under boost and heat the unbraced cylinder wall moves sideways, and this micro-movement puts a shearing load on the fire ring of the head gasket. The ring cuts further into itself with each thermal cycle, and because there is no solid backing underneath it between the cylinders, it extrudes into the coolant slots. In the end it lets pressurised gas and coolant through.

Show the rest

It is not the mileage that decides but the year of casting and the use. On the blocks cast between 2015 and 2019 there are grooves forming slots between the cylinders, and the risk is highest on those. In 2020 the maker revised the casting: in place of the open slots came small coolant passages drilled diagonally from the outer wall, and with that the metal backing returned. The number of failures dropped noticeably as a result.

The load is what counts, not the distance: the critical case is a heat-soaked restart after hard use.

The symptom is coolant going down with no visible dripping, white smoke, an uneven, stumbling idle, misfires (codes P0300 and P0316), mayonnaise-like oil and running hot.

The repair starts with a pressure test, then a revised gasket, a new cylinder head or a complete block replacement follows, depending on the extent of the damage. An engine that had already overheated before the repair can remain distorted, and then the coolant loss comes back.

What to check

  • Check the casting year of the block: a casting from between 2015 and 2019 is the risky one, post-2020 is the good one
  • If it is from between 2015 and 2019, ask for the repair history of the head gasket or proof of a block replacement
  • Look at the coolant level and ask whether it has had to be topped up
3 more steps in the write-up

Engine code

Factory data

Factory data

Engine family
—
Fuel
petrol
Displacement
2261 cc
Power
233 kW (317 HP)
Production
—

Generations

Which models it is fitted to

1 generations.

Information, not an expert opinion

We write the descriptions, and we put the source next to them. A person reviews them before they go out. They are still information, not a technical expert opinion.

  • A fault on the list does not mean the car you are looking at has it.
  • A fault missing from the list does not mean the model is fault-free. Write-ups are made model by model. Not all of them are done.
  • You decide whether to buy. This is no substitute for an inspection. That needs a workshop and a history check.
Details in the terms