A12/00068/19Safety recallInjuriesno date · EU Safety Gate
The press-in force of the counterbalance shaft’s bearing shells may not have met the specifications, which could cause the counterbalance shaft to become loose. As a result, the engine could be damaged and locked in motion, increasing the risk of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/00636/20Safety recallInjuriesno date · EU Safety Gate
The cable connecting the hall sensor with the seat buckle might be too short.
Consequently, the sensor might detach from the buckle, causing a faulty seatbelt lock recognition, impairing the functioning of the restraint system and the deployment of the airbag, increasing the risk of injury in the event of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/00988/23Safety recallInjuriesno date · EU Safety Gate
The driver's and/or passenger's seat could break the frame rail that connects the seat to the guide rails on the vehicle floor. The stability of the seats may be affected, increasing the risk of injury in case of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01162/20Safety recallInjuriesno date · EU Safety Gate
A vibration fatigue failure of the track rod may occur due to to an exceptional bending load.
Such a failure would lead to a loss of wheel control on one side of the vehicle, increasing the risk of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01377/22Safety recallFireno date · EU Safety Gate
Defects in the winding of cell-internal foils in the high-voltage batteries can lead to the occurrence of increased self-discharge. This can cause high voltage cell modules to overheat, increasing the risk of fire.
The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/0966/19Safety recallInjuriesno date · EU Safety Gate
The knee airbags may be defective. This could lead to inadequate inflation of the knee airbags in the event of an accident, increasing the risk of injury.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/1474/19Safety recallInjuriesno date · EU Safety Gate
The head restraint interlock of the rear center seat may not have been
welded sufficiently to the head restraint support rod bracket and could break. This could cause an inadvertent folding down of the head restraint in case of a rear impact, increasing the risk of an injury.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice