A12/00615/21Safety recallInjuriesno date · EU Safety Gate
Due manufacturing defect in the instrument panel, the deployment of the airbag could be impeded.
This could impair its protective potential and could lead to plastic parts become detached when the airbag is activated, increasing the risk of injury in the event of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00689/20Safety recallFireno date · EU Safety Gate
Moisture can penetrate into the belt starter generator.
This can result in a short circuit, leading to local overheating and increased risk of fire.
Due to the permanent power supply of the starter generator, this can occur when the vehicle has already been parked for a while.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00752/21Safety recallInjuriesno date · EU Safety Gate
The vehicles may be fitted with a towbar with a swivel mechanism that may have a defective locking pin.
As a result, the pin could break while driving, increasing the risk of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00788/23Safety recallInjuriesno date · EU Safety Gate
The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00884/21Safety recallInjuriesno date · EU Safety Gate
The propellant used in the airbag inflator of the passenger airbags, manufactured by Takata, may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01401/20Safety recallFireno date · EU Safety Gate
Moisture can ingress into the belt starter generator, generating short-circuits.
This can lead to local overheating of the component, increasing risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01891/20Safety recallInjuriesno date · EU Safety Gate
The Takata gas generator housing could burst when the passenger airbag is deployed.
This may cause small metal parts to become detached from the housing, posing a risk of injury to the occupants.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0217/19Safety recallFireno date · EU Safety Gate
The electrical connector for the auxiliary heating element may not have been fully secured during the assembly process. This could lead to increased contact resistances in the connector area. In such cases, thermal overload could arise, which can lead to a fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0264/19Safety recallInjuriesno date · EU Safety Gate
Due to contamination during its manufacture, the bonding of the components of the sunroof may be affected. Consequently there could be leaks in the sunroof or the rear glass panel could even detach.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0333/17Safety recallInjuriesno date · EU Safety Gate
Differences in the mixture ratio for the initiating devices for the airbags or seat-belt pre-tensioners could lead to the airbags or seat-belt pre-tensioners not activating in the event of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0382/19Safety recallFireno date · EU Safety Gate
In certain vehicles, fuel can leak onto the engine fuel rail. Fuel leakage close to a source of ignition may increase the risk of the vehicle catching fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0713/17Safety recallFireno date · EU Safety Gate
The additional coolant pump can block due to foreign particles in the cooling system. This can result in the pump overheating which could lead to a fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0862/19Safety recallInjuriesno date · EU Safety Gate
The locking mechanism in the articulated trailer hitch may be defective. Consequently, the trailer hitch might not be correctly locked and could swing out, causing the trailer to drop while the vehicle is in motion.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0942/18Safety recallFireno date · EU Safety Gate
The auxiliary coolant pump may seize up. This could lead to the pump overheating after the engine has been switched off with the risk that the vehicle could catch fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
