18V427000AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULEAIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE22 June 2018 · NHTSA (USA)
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2005-2008 Audi A4 Sedan, A4 Avant, S4 Avant and S4 Sedan, 2007-2008 RS4 Sedan, 2004 RS4 Cabriolet, 2007-2009 A4 Cabriolet and S4 Cabriolet, 2005-2011 A6 Sedan, 2006-2011 A6 Avant, and 2007-2011 S6 Sedan vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Audi has notified owners, and dealers will replace the passenger frontal air bag with an alternate remedy part, free of charge. The recall began June 29, 2018. Owners may contact Audi customer service at 1-800-253-2834. Volkswagen's number for this recall is 69R7. Note: This recall supersedes recalls 16V382, 17V032 and 18V004 and includes vehicles that may have had their air bag previously replaced under one of those campaigns.
We could not check this: model year. The authority's notice
18V004000AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULEAIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE4 January 2018 · NHTSA (USA)
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2010-2011 Audi A6 Avant, A6 Sedan and S6 Sedan vehicles, ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B."
Additionally, unless included in "Zone B" above, Volkswagen is recalling certain 2009 Audi A4 Cabriolet and S4 Cabriolet vehicles, and 2009-2011 Audi A6 Avant, A6 Sedan and S6 Sedan vehicles registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C."
These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Audi will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Audi mailed an interim owner notification March 02, 2018. When parts to perform the recall repair become available, Audi will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall is expected to begin in June 2018. Owners may contact Audi customer service at 1-800-253-2834. Volkswagen's number for this recall is 69U1. Note: This recall has been superseded by 18V427.
We could not check this: model year. The authority's notice
16V382000AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULEAIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE1 June 2016 · NHTSA (USA)
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain model year 2004-2008 Audi A4, and 2005-2011 Audi A6 vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A."
Additionally, unless included in "Zone A" above, Volkswagen is recalling certain model year 2004-2008 Audi A4, and 2005-2008 Audi A6 vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B."
Lastly, unless included in "Zone A" or "Zone B" above, Volkswagen is recalling model year 2004 Audi A4 vehicles originally sold, or registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming.
These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy: Audi will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Owner notification letters were mailed April 28, 2017. Owners may contact Audi customer service at 1-800-822-2834.
We could not check this: model year. The authority's notice
11V580000AIR BAGS:SIDE/WINDOWAIR BAGS:SIDE/WINDOW6 December 2011 · NHTSA (USA)
VOLKSWAGEN IS RECALLING CERTAIN MODEL 2012 AUDI A6 VEHICLES MANUFACTURED FROM APRIL 8, 2011, THROUGH MAY 26, 2011. DUE TO A PROBLEM IN THE STITCHING PROCESS OF THE CURTAIN AIR BAG, THE SEAM OF THE AIR BAG MAY NOT BE STITCHED PROPERLY.
Risk: IN THE EVENT OF A CRASH, THE HEAD CURTAIN AIR BAG MAY NOT DEPLOY AND WILL NOT BE ABLE TO PROPERLY PROTECT AN OCCUPANT, INCREASING THE RISK OF AN INJURY.
Remedy: VOLKSWAGEN WILL NOTIFY ALL OWNERS AND DEALERS WILL REPLACE THE LEFT AND/OR RIGHT CURTAIN AIR BAG FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING JANUARY 2012. OWNERS MAY CONTACT VOLKSWAGEN AT 1-800-822-8987.
We could not check this: model year. The authority's notice
A12/00615/21Safety recallInjuriesno date · EU Safety Gate
Due manufacturing defect in the instrument panel, the deployment of the airbag could be impeded.
This could impair its protective potential and could lead to plastic parts become detached when the airbag is activated, increasing the risk of injury in the event of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00689/20Safety recallFireno date · EU Safety Gate
Moisture can penetrate into the belt starter generator.
This can result in a short circuit, leading to local overheating and increased risk of fire.
Due to the permanent power supply of the starter generator, this can occur when the vehicle has already been parked for a while.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00752/21Safety recallInjuriesno date · EU Safety Gate
The vehicles may be fitted with a towbar with a swivel mechanism that may have a defective locking pin.
As a result, the pin could break while driving, increasing the risk of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00788/23Safety recallInjuriesno date · EU Safety Gate
The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00884/21Safety recallInjuriesno date · EU Safety Gate
The propellant used in the airbag inflator of the passenger airbags, manufactured by Takata, may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01401/20Safety recallFireno date · EU Safety Gate
Moisture can ingress into the belt starter generator, generating short-circuits.
This can lead to local overheating of the component, increasing risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01891/20Safety recallInjuriesno date · EU Safety Gate
The Takata gas generator housing could burst when the passenger airbag is deployed.
This may cause small metal parts to become detached from the housing, posing a risk of injury to the occupants.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0217/19Safety recallFireno date · EU Safety Gate
The electrical connector for the auxiliary heating element may not have been fully secured during the assembly process. This could lead to increased contact resistances in the connector area. In such cases, thermal overload could arise, which can lead to a fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0264/19Safety recallInjuriesno date · EU Safety Gate
Due to contamination during its manufacture, the bonding of the components of the sunroof may be affected. Consequently there could be leaks in the sunroof or the rear glass panel could even detach.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0333/17Safety recallInjuriesno date · EU Safety Gate
Differences in the mixture ratio for the initiating devices for the airbags or seat-belt pre-tensioners could lead to the airbags or seat-belt pre-tensioners not activating in the event of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0382/19Safety recallFireno date · EU Safety Gate
In certain vehicles, fuel can leak onto the engine fuel rail. Fuel leakage close to a source of ignition may increase the risk of the vehicle catching fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0713/17Safety recallFireno date · EU Safety Gate
The additional coolant pump can block due to foreign particles in the cooling system. This can result in the pump overheating which could lead to a fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0862/19Safety recallInjuriesno date · EU Safety Gate
The locking mechanism in the articulated trailer hitch may be defective. Consequently, the trailer hitch might not be correctly locked and could swing out, causing the trailer to drop while the vehicle is in motion.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0942/18Safety recallFireno date · EU Safety Gate
The auxiliary coolant pump may seize up. This could lead to the pump overheating after the engine has been switched off with the risk that the vehicle could catch fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
