SR/02979/25Safety recallInjuries4 August 2025 · EU Safety Gate
The structure of the airbag can deteriorate. If the airbags deploy, it could result in fragments from the inflator, injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 04/08/2025
Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Request to stop driving
Date of entry into force: 04/08/2025
We could not check this: model year. The authority's notice
SR/02659/25Safety recallInjuries3 July 2025 · EU Safety Gate
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 03/07/2025
We could not check this: model year. The authority's notice
A12/01581/24Safety recallInjuries1 December 2023 · EU Safety Gate
The propellant used in the driver airbag inflator can degrade when exposed to very high temperatures and levels of humidity. If activated after an impact, excessive internal pressure may cause the inflator to burst, and metal fragments could pass through the cushion material causing injury to occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 01/12/2023
We could not check this: model year. The authority's notice
A12/01877/23Safety recallEnvironment19 June 2023 · EU Safety Gate
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 19/06/2023
We could not check this: model year. The authority's notice
A12/00135/21Safety recallInjuriesno date · EU Safety Gate
The wheel screws are not tightened with the required torque.
This could lead to a wheel being lost during driving, increasing the risk of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00381/22Safety recallInjuriesno date · EU Safety Gate
A defect in the gas generator of the driver airbag can lead to uncontrolled inflation and the release of metal fragments when the airbag is activated. This defect may increase the risk of injuries in the event of an accident. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0126/17Safety recallInjuriesno date · EU Safety Gate
Due to a wrong mixing ratio of the primary ignition chemicals in the gas generators, the airbag may not be triggered in the event of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/1017/18Safety recallFireno date · EU Safety Gate
A wrongly-fitted sealing ring may lead to oil leakage on the turbo oil-line. The leaking oil may ignite and cause a fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/1889/19Safety recallInjuriesno date · EU Safety Gate
As a result of a production error, the crossmember of the front seat structure has been welded incorrectly. This could lead to the seat not having the required crash behaviour in the event of an accident, increasing the risk of an injury.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
