The density of the propellant in the airbag inflator may be reduced due to high temperature cycling and moisture in the propellant and its sealed container. In the event of an accident this can lead to the release of fragments of the front airbag from the generator housing, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Importer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The airbag control module for the supplemental restraint system (SRS ECU) has been assembled with application-specific integrated circuits (ASICs) that are susceptible to internal shorting when exposed to high inductive electrical noise from various vehicle electrical components. If this occurs, there is a possibility that the ASIC could become damaged, leading to the airbag(s) and/or seat belt pretensioners being deactivated or deploying inadvertently.

Remedy: Type of economic operator taking notified measure(s): Importer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The ammonium nitrate propellant used in the air bag inflator may degrade over time due to heat cycles and exposure to moisture. In the event of the airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the rider.

Remedy: Type of economic operator taking notified measure(s): Importer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice