Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2019 AMG G63, C300, E300, G550, AMG GT63, AMG GT53, 2019-2020 A220, GLA250, GLC300, 2016 C300, 2020 AMG A35, AMG C43, AMG C63, CLA250, E350, E450, GLB250, GLE450, GLS450, GLS580, S560, and SL550 vehicles equipped with a gasoline engine. During the manufacturing process, particles may have been trapped between the fuel rail and injectors, which can cause a fuel leak.

Risk: A fuel leak in the presence of an ignition source, such as hot engine or exhaust components, can increase the risk of a fire.

Remedy: Dealers will replace the fuel rail and fuel injectors, free of charge. Owner notification letters were mailed April 22, 2022. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for the recall is 2022030003.

We could not check this: model year. The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2017-2021 C300, 2017-2020 AMG C43, and AMG C63 vehicles. The front seat belts might not fully retract to their stowed position. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."

Risk: If the seat belt does not fully retract, the occupant may find the operation of the seat belt inconvenient and not wear it, increasing the risk of injury in the event of a crash.

Remedy: MBUSA will notify owners, and dealers will check the retraction function of the front seat belts and adjust the damping foam within the B-pillars, as necessary, free of charge. The recall began February 26, 2021. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2021020010.

We could not check this: model year. The authority's notice

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2019 C300 vehicles. The center console lock-system might not lock properly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 201, "Occupant Protection In Interior Impact."

Risk: In the event of a rear-end crash, the center console lid may open, increasing the risk of injury to occupants.

Remedy: MBUSA will notify owners, and dealers will check the center console storage compartment, and replace it, if necessary, free of charge. The recall began October 30, 2020. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2020100006.

We could not check this: model year. The authority's notice

Mercedes-Benz USA, LLC (Mercedes) is recalling certain 2017-2018 Mercedes-Benz C300 Cabriolet, C300 Coupe, AMG C43 Coupe, C300 4MATIC Cabriolet, C300 4MATIC Coupe, AMG C43 Cabriolet, AMG C63 Cabriolet, AMG C63 Coupe, AMG C63 S Cabriolet and AMG C63 S Coupe vehicles and 2018 Mercedes-Benz E400 Coupe, E400 Cabriolet, E400 4MATIC Cabriolet and E400 4MATIC Coupe vehicles. The seatbacks of the front seats may not properly lock on the right side of the seat.

Risk: If the seatback does not properly lock, in the event of a crash, the seatbacks may fold forward, increasing the risk of injury.

Remedy: Mercedes will notify owners, and dealers will inspect the locking of the seatback on the affected vehicles and replace the seatback lock, as necessary, free of charge. An interim owner letter was mailed on April 12, 2019 to notify owners. Owners will receive a second notification when the remedy is available. Owners may contact Mercedes-Benz customer service at 1-800-367-6372. MBUSA's number for this recall is 2019040007.

We could not check this: model year. The authority's notice

Mercedes-Benz USA,LLC (Mercedes) is recalling certain 2019 C43 AMG, C43 AMG Cabrio, C43 AMG 4MATIC Coupe, C300 4MATIC, C300 4MATIC Coupe, C300 Coupe, C300 Cabrio, C300 4MATIC Cabrio, and C300 vehicles. After parking and exiting the vehicle, the Electronic Stability Program (ESP) software may prevent the electronic parking brake from being disengaged when returning to the vehicle, unless the ESP system is deactivated.

Risk: Driving the vehicle with the ESP system deactivated could increase the risk of a crash.

Remedy: Mercedes has notified owners, and dealers will update the ESP system software, free of charge. The recall began January 29, 2019. Owners may contact Mercedes customer service at 1-800-367-6372. Mercedes' number for this recall is 2018120025.

We could not check this: model year. The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2015-2016 Mercedes Benz C300, 2017-2019 C300 Cabrio, C300 Coupe, C63 Cabrio, 2015 C63S AMG, 2018-2019 C300, C350e, C63 AMG, C63S AMG Cabrio, 2018 C63 AMG Cabrio, C63 AMG Coupe, C63S AMG, C63S AMG Coupe, E300, E400 Cabrio, E400 Coupe, 2019 CLS450, E450 Cabrio, and E450 Coupe rear-wheel drive vehicles. A locknut in the steering rack may break under high load, possibly causing the steering to become stuck in one position.

Risk: A car that cannot be properly steered has an increased risk of a crash.

Remedy: MBUSA will notify owners, and dealers will replace the steering rack, free of charge. The recall began August 23, 2019. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2019080012.

We could not check this: model year. The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2017-2018 Mercedes C300 Cabriolet, C300 4Matic Cabriolet, C43 AMG Cabriolet, C63S AMG Cabriolet, and C63 AMG Cabriolet vehicles. Due to a bonding issue introduced in the production process, the rear beltline trim may separate from the vehicle.

Risk: If the beltline trim were to separate from the vehicle while driving, it could become a road hazard, increasing the risk of a crash.

Remedy: MBUSA will notify owners, and dealers will inspect the rear beltline trim and replace the trim if necessary, free of charge. The recall began on September 21, 2018. Owners may contact MBUSA customer service at 1-800-367-6372.

We could not check this: model year. The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2017-2018 C43 AMG 4Matic Coupe, C300 Coupe, C300 4Matic Coupe, C300 4Matic Cabriolet, C300 Cabriolet, C43 AMG 4Matic Cabriolet and C63S AMG Cabriolet, 2017 C63 AMG Cabriolet, C63S AMG Coupe and C63 AMG Coupe, 2018 E400 Coupe and E400 4Matic Coupe vehicles. The seatbacks of the front seats may not properly lock on the right side of the seat.

Risk: If the seatback does not properly lock, in the event of a crash, the seatbacks may fold forward, increasing the risk of injury.

Remedy: MBUSA will notify owners, and dealers will inspect the locking of the seatbacks, replacing the seatbacks lock, as necessary, free of charge. The recall is expected to begin May 25, 2018. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2018040007.

We could not check this: model year. The authority's notice

The starter current limiter may be overloaded and overheat. As a consequence, the surrounding components could ignite, leading to a fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: 01/09/2017

We could not check this: model year. The authority's notice

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2016-2017 C300 vehicles. The electrical contacts for the power steering electric motor may not have been properly welded, possibly resulting in a loss of electrical contact.

Risk: A loss of electrical contact will cause the electric power steering assist to deactivate, increasing the risk of a crash.

Remedy: MBUSA will notify owners, and dealers will replace the electric power steering rack, free of charge. The recall began June 2017. Owners may contact MBUSA customer service at 1-800-367-6372.

We could not check this: model year. The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2016 C300 4Matic vehicles manufactured November 4, 2015, to March 1, 2016. In the affected vehicles, the electric power steering assist system may shutdown due to a software error.

Risk: If the vehicle experiences a loss of power steering assist, extra steering effort will be required at lower speeds, increasing the risk of a vehicle crash.

Remedy: MBUSA will notify owners, and dealers will update the software for the electric power steering control unit, free of charge. The recall began January 2017. Owners may contact MBUSA customer service at 1-800-367-6372.

We could not check this: model year. The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2016 C300 vehicles manufactured December 11, 2015, to December 23, 2015, C300 4Matic vehicles manufactured December 12, 2015, to December 29, 2015, and C450 AMG 4Matic vehicles manufactured December 12, 2015, to December 22, 2015. The affected vehicles may be equipped with a panoramic sunroof that may not be properly bonded, allowing the glass to detach and fall from the vehicle during operation.

Risk: If the panoramic glass detaches during vehicle operation, it can increase the risk of injury or crash.

Remedy: MBUSA will notify owners, and dealers will inspect the bonding of the rear sunroof glass panel, replacing it as necessary, free of charge. The recall began on April 12, 2016. Owners may contact MBUSA customer service at 1-800-367-6372.

We could not check this: model year. The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2015 C300 and C400 4matic sedans manufactured January 27, 2014, to December 1, 2014. Due to an error in the electric power steering control unit software, the affected vehicles may have a loss of electric power steering assist.

Risk: If the vehicle experiences a loss of power steering assist, extra steering effort will be required, especially at lower speeds, increasing the risk of a vehicle crash.

Remedy: MBUSA will notify owners, and dealers will update the power steering software, free of charge. The recall began in January 15, 2016. Owners may contact MBUSA customer service at 1-800-367-6372.

We could not check this: model year. The authority's notice

Mercedes-Benz USA, LLC. (MBUSA) is recalling certain model year 2015 C300 4matic and C400 4matic vehicles manufactured April 7, 2014, to July 25, 2014. In the affected vehicles, the fuel delivery module may be improperly secured to the fuel tank. Secondly, electrical wires that connect to the fuel delivery module might have been pinched between the flange of the fuel delivery module and the tank.

Risk: If the locking plate is not properly secured to the fuel delivery module it may become loose, and leak fuel, increasing the risk of a fire. If the electrical wires are pinched, the fuel pump may stop working, resulting in a stall, thereby increasing the risk of a crash.

Remedy: MBUSA will notify owners, and dealers will inspect the vehicles for improperly secured locking plates and pinched wires, correcting the vehicles as necessary, free of charge. The recal began on April 24, 2015. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2015030004.

We could not check this: model year. The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2015 C300 and C400 vehicles manufactured from June 18, 2014, through September 5, 2014, that fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment." The affected vehicles were assembled with horizontal adjustment mechanisms that allow the owner to change the horizontal adjustment used during the manufacturing process, instead of the proper sealing caps.

Risk: If the original horizontal adjustment is used to alter the low beam aim, the misaimed headlamp may not properly illuminated the road or cause increased glare to oncoming drivers, which increases the risk of a crash.

Remedy: Mercedes-Benz will notify owners, and dealers will replace the horizontal adjustment mechanisms on the headlamps with sealing caps on the affected vehicles. The recall began May 23, 2016. Owners may contact Mercedes at 1-800-367-6372.

We could not check this: model year. The authority's notice

Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2015 C300 4Matic and C400 4Matic vehicles manufactured March 28, 2014, to September 18, 2014. If the steering coupling interlock mechanism is not locked in place, the sliding shaft, which is part of the steering column, could become disengaged from the steering coupling socket due to vibrations, steering thrust, or load feedback from the road surface.

Risk: If the sliding shaft becomes disengaged from the steering coupling socket, the driver may experience noises, steering backlash, and in a worst case, loss of steering control, which may increase the risk of a crash.

Remedy: MBUSA has notified owners, and dealers will inspect the steering coupling interlock mechanism to verify that it is in the locked position, free of charge. The recall began on October 1, 2014. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2014090008.

We could not check this: model year. The authority's notice

The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

Due to an incorrect material composition of the Mode 2 charging cable for charging at a household power socket, the insulation resistance of the rubber buffer could be impaired, overriding the protective function of the charging cable. Furthermore, in combination with an error in the household infrastructure, the activation of the protective device in the household electrical circuit might be prevented. This could cause the user to have an electrical shock and could lead to a fire. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

Due to delivery of the wrong complete winter tyre kit, clients/garages may have installed a wheel-tyre-combination which is not authorised for the vehicles. When driving, high loads together with high speeds could overstrain the tyres and result in inadmissible heating which could cause damage to the tyres.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The cupholder in the centre armrest of the second seat row may become detached from the armrest in the event of an accident. This could increased the risk of injury to occupants of the vehicle. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The wiring harness for the steering control device may have been damaged during the production process and can allow moisture to ingress into the control unit. This may lead to the loss of electric steering support, increasing the risk of accident. Moreover, a short circuit of the damaged wiring harness can occur, leading to increased risk of fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The latching of the electrical connector of the left acceleration crash sensor onto the cross beam may not be in line with specifications, so the electrical connector of the crash sensor might become detached as a result of vibration while the vehicle is driven or in an accident with multiple impacts. As restraint systems will not be triggered, this could reduce the restraint effect, increasing the risk of injury. The product does not comply with the requirements of the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The maximum permissible operating temperature of individual diodes on the alternator rectifier bridge could be exceeded and the diodes could subsequently fail. Consequently, an improper flow of current from the on-board electrical system battery through the alternator to the vehicle earth could occur. As a result, the windings in the alternator stator could be heated to such an extent that an outbreak of fire cannot be ruled out.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

Improper foam used in the front bumper may cause the active hood release to fail to deploy in the event of a collision with a pedestrian, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The level sensors of the vibration damper software may not have been installed in the correct direction which can cause the headlamp levelling to be outside the tolerance limits. If the vehicle is used with the maximum number of passengers, this will result in the oncoming traffic being affected by glare.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

Faulty connection of the inerting system’s gas pipes could impair the intended distribution of argon shielding gas to the points where there could be contact between the leaking refrigerant R1234yf and hot engine components in the event of an accident. This would reduce the cooling effect of the inerting gas, leading to increased risk of fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate and the panel could become detached from the vehicle, posing a risk to other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

An erroneous notch in the impact absorber may lead to failure of the tube sensor for the actuation of the active hood. In case of an accident, the active hood for pedestrian protection might be lifted too late or not at all, increasing the risk of injury to the pedestrian involved. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The airbag control unit may be faulty, resulting in that the PRE-SAFE function and/or the active bonnet are not activated as intended, increasing the risk of injury in case of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The left tank strap may not have been screwed correctly and could become loose, causing the fuel tank to come into contact and become damaged by the drive shaft. This might result in a fuel leak, leading to increased risk of fire and posing a risk to the following traffic.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The power-assisted steering control units may have been fitted with defectively welded contacts. As a result, a permanent electrical connection between the contacts cannot be guaranteed, which could lead to loss of support to the power-assisted steering and thus an increased risk of accidents.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The rear head rests might not have been attached correctly. As a result, they could become displaced or detached from the seat in the event of an accident, increasing the risk of injury.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The brake discs installed on the front axle may be too small (in diameter and thickness) and would not sit symmetrically in the brake calliper. As a result, the brake lining can wear out and a gap between the piston and the sealing ring can be formed, allowing brake fluid to leak out. This will impair the braking performance, increasing the risk of an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

Due to a defect in the high fuel pressure manifold the engine might be damaged. This may lead to reduced engine power and to inability to start the vehicle, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Importer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The heat shielding plate on the exhaust gas turbocharger may not comply with the specifications. As a result, it can come into contact with the oil pipe of the turbocharger and damage it, leading to increased risk of fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The left-hand side, rear seat-back lock does not comply with the specifications. This could lead to a failure of the seat-back locking system in the event of an accident, increasing the risk of injury.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The ESP control unit software does not comply with the specifications and may not be able to adapt to the type of brakes installed. This can cause the ESP system to be unable to respond as intended to a possible drift of the yaw rate sensor or to a failure of the brake vacuum supply. As a result, the ESP intervention may be inappropriate to the driving situation, increasing the risk of an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The high-voltage battery might not be correctly screwed to the body of the vehicle in the boot area. As a result, it could become detached in the event of an accident, increasing the risk of injury to the occupants of the vehicle.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

Fuel may leak and the fuel line pressure may drop, leading to misfires or even engine stalling while driving, increasing the risk of an accident. Moreover, fuel leaks could pose a risk to following traffic. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The driver and passenger airbags of the company Takata in vehicles with ammonium nitrate gas generators without drying agents could, under certain climate conditions, lead over time to a chemical change in the fuel. In the event of an accident triggering the release of the driver or passenger airbag, this change could cause the gas generators to burst. If a gas generator ruptures, the airbag would then have no restraining function and loose parts from the gas generator could reach the vehicle interior. This would increase the risk of injury for passengers.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose screw connection, oil might leak at the oil-supply and/or oil-return pipe of the turbocharger. The leaking oil might then come into contact with hot components, increasing the risk of fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

Improper tyre pressure label in the tank cap may result in the tyre pressure not being identified based on the vehicle load and thus the vehicle operating with insufficient tyre pressure. As a result, the tyre may be damaged, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The steering wheel may not be correctly connected with the steering gearbox. This could lead to loss of steering of the vehicle increasing the risk of accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

Moisture could enter the signal acquisition and actuation module. In this case, a short circuit may occur and as a result the risk of fire increases. Moreover, this moisture may cause the exterior lighting at the rear of the vehicle to fail, the rear backseat may unintentionally fold, and the rear-view camera may not be available, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

Faulty configurations of the control units (traction systems, signal recording triggering modules, engine control units and headlights) could cause one or more control units to malfunction, which could increase the risk of an accident. The exhaust emissions exceed the legal limits, posing a risk to the environment. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

Improperly connected layers of the windscreen could lead to its delamination in the event of an accident. Moreover, glass splinters could break free and impair the support of the passenger airbag. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The belt tensioner arm may have been manufactured with a borderline tolerance, which could cause one side of the V-ribbed belt to rub against the belt tensioner, causing it to fail. As a result, the coolant pump may stop working, causing the engine to overheat, thus compromising the impermeability of the oil sump. Consequently, oil may leak onto the road, posing a risk to the following traffic. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

In certain GLE/GLS (BR 167) and C-class vehicles, the seats might be constructed incomplete or with unintended trim, increasing the risk of injury in the event of an accident. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

In vehicles with automatic child-seat detection, the status shown in the centre console of the passenger airbags may not be correctly indicated. In this case, the vehicle users would not be correctly informed of the actual activation status of the passenger airbag and may not react appropriately to a potentially false passenger classification, thereby increasing the risk of injury for passengers in the event of an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

There may be cracks in a securing nut in the steering gear of rear-wheel-drive vehicles. The nut could consequently break if the steering system is subject to a very high lateral force, which could result in rotating parts in the steering gear affecting the casing and thereby blocking the steering system.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The gearbox may be faulty. Forces and vibrations may occur when driving, which could damage the gear-shift linkage and the gearbox could disconnect from the drive shaft, causing the vehicle to lose propulsion. Moreover, components could detach from the vehicle, posing a risk to other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The tightening torque on the screw connections on certain 12V and 48V ground points may be insufficient. This may lead to improper wiring fixation, which may cause rise of temperature in this area, increasing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

In some cases the end mount of the seat belt on the driver’s seat may not have been fitted in accordance with the specifications, for this case the end mount of the seat belt would be held in position only by the external seat trim. In the event of adverse conditions or an accident this could seriously impair the restraining function of the seat belt and increase the risk of injury to the driver. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The incorrect connection of a wiring harness to the pre-fuse box can cause a failure and increased electrical resistance. This can lead to a sudden loss of propulsion, which increases the risk of accidents and injuries. Moreover, this can increase the risk of fire in the vehicle. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

A defective sensor installed within the electrical power steering system may lead to deactivation of the power steering assistance. As a consequence, there is an increased risk of accidents.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

Faulty welding between the fuel tank and the filler pipe can cause a fuel leak, creating a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The sensors in some seatbelt locks may not have been adequately manufactured. Consequently, they might not detect a correctly fastened seatbelt and thus not activate the pre-tensioner systems (electric and pyrotechnic). In the event of an accident, these might not work leading to a limited restraint capacity and increasing the risk of injury to the occupants.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

In vehicles with rear-wheel drive, a lock nut in the steering gear may be cracked. Consequently, when the steering is placed under high forces it could break, which would block the steering gear and increase the risk of accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered in the event of an accident, the airbag control unit may not recognise the belt buckle status, the engine control unit could be coded with a false maximum speed or various assistance systems may not function.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The steering coupling might not have been screwed to the correct torque specification. As a consequence, the steering coupling can become detached from the steering wheel axle and it would become impossible to steer the vehicle.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The propellant mixing ratio in certain seat-belt pre-tensioner igniters may be incorrect. As a result, in the event of an accident where the front seat-belt pre-tensioners are activated, the pre-tensioners would not provide the restraint performance required if the igniter did not ignite as intended. This could put the occupants at a greater risk of injury.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The sleep mode functionality of the electronic parking brake within the electronic stability programme (ESP) software may be defective. As a result, the brake lights may be permanently activated or the ESP function could be deactivated, increasing the risk of an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The welding of the backrests of the driver's and front passenger's seats may be defective. In the event of an accident, the welding could break, increasing the risk of injury to the occupant of the seat in question.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The casing material of the gas generator of the driver airbag may be defective. In the event that the airbag is deployed, the airbag may not protect the driver and detached parts might enter the passenger compartment causing injury to the vehicle occupants.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The seat-backs may not be fully secured on the right-hand side of the front seats. In the event of an accident, any unsecured objects on the rear seats of the vehicle may not be restrained, thereby increasing the risk of injury to passengers in the front seats.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The fixing screws for the turbocharger oil return line and the crankcase breather pipe may have been interchanged. Due to a screw being too long, the pre-tensioning force of the screw connection may be insufficient and oil could leak from the turbocharger oil return line. As a result, oil could come into contact with hot components, increasing the risk of fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The decorative strips on the rear waist finisher have not been glued on correctly. As a consequence they can detach, fall into the road, increasing the risk of accident of the following traffic.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The lower engine compartment cover lacks the necessary left-hand gap for the exhaust system. As a result, the exhaust system temperatures resulting from operation at full load could lead to the cover catching fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The bolts which connect the cross-member of the trailer coupling device (towbar) to the vehicle may not have been tightened with the correct torque. As a result, the cross-member and the trailer could be completely detached from the vehicle, endangering the following traffic and increasing the risk of an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The steering column is not sufficiently earthed. As a result, in the event of an electrostatic discharge, the driver's airbag may be triggered when not required. This could cause an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The fixing screw connecting the base holder of the manual control device may not be correctly fitted. This can impair the control over the vehicle, increasing the risk of an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

Ground-cable bolts may not have been tightened with sufficient torque. This can lead the wiring harness not to be properly secured and result in an increase of the connection's electrical resistance. The temperature can rise in this area, increasing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The safety cap on the end mount of the seat belt of the passenger seat may not be correctly installed. The safety cap could become detached over the life of the vehicle, and the belt would no longer be fixed in its anchorage. In the event of abrupt deceleration or in the event of an accident, the belt may no longer have a restraining effect, thereby increasing the risk of accident/injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice

The three aluminium screws of the steering box may corrode due to exposure to spray water and aggressive road-grit (salt) used for melting ice. Advanced corrosion could weaken the screws, leading to potential breakage during manoeuvring or parking. If all fixing screws fail, the power-assisted steering could detach, resulting in a loss of power steering and an increased risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

We could not check this: model year. The authority's notice