A12/01658/21Safety recallInjuries2 November 2021 · EU Safety Gate
In certain vehicles with a calliper disc-brake system, the bolts of the brake callipers on the front axle may not meet the specifications. A brake calliper can detach during braking, which may lead to braking power being reduced and components being lost. That would increase the potential risk of accidents, including for the following traffic. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Distributor
Category of measure(s): Recall of the product from end users
Date of entry into force: 02/11/2021
We could not check this: model year. The authority's notice
19V605000ELECTRICAL SYSTEM:WIRINGELECTRICAL SYSTEM:WIRING16 August 2019 · NHTSA (USA)
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2019 CLS 450 Coupe and CLS 450 Coupe 4MATIC vehicles equipped with 6-cylinder gasoline engines. The electrical line that supplies power to the engine coolant pump may contact the engine fan and chafe, possibly causing a malfunction of the coolant pump or a deactivation of the 48V on-board electrical system.
Risk: A malfunctioning engine coolant pump can increase coolant temperatures, possibly leading to an engine stall. Deactivation of the 48V on-board electrical system can cause the vehicle to not restart after using the ECO start/stop function or "Glide" mode. Either of these scenarios can increase the risk of a crash.
Remedy: MBUSA will notify owners, and dealers will inspect the coolant pump electrical line for damage, repairing it and rerouting it as necessary, free of charge. The recall began November 1, 2019. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2019090019.
We could not check this: model year. The authority's notice
18V911000EXTERIOR LIGHTING:HEADLIGHTSEXTERIOR LIGHTING:HEADLIGHTS19 December 2018 · NHTSA (USA)
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2019 CLS450, CLS450 4MATIC, and CLS53 AMG vehicles. The horizontal adjustment screw may not be effectively sealed, allowing the headlights to be improperly adjusted. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, & Associated Equipment."
Risk: If the headlights are not properly adjusted, the driver may have reduced visibility, increasing the risk of a crash.
Remedy: MBUSA has notified owners, and dealers will inspect the horizontal headlight adjustment screws, sealing them as necessary, free of charge. The recall began March 15, 2019. Owners may contact Mercedes-Benz customer service at 1-800-367-6372. MBUSA's number for this recall is 2019020007.
We could not check this: model year. The authority's notice
A12/00017/22Safety recallFireno date · EU Safety Gate
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment.
Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00045/22Safety recallFireno date · EU Safety Gate
The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00463/24Safety recallEnvironment, Fireno date · EU Safety Gate
The 48V ground cable bolt in the engine compartment may be incorrectly secured. This could increase electrical transition resistance at the point of connection. As a result, the high electrical currents that can flow through this connection could increase the temperature, increasing the risk of fire. Furthermore, the 48V electrical power supply failure may increase exhaust emissions. This could have a negative impact on the environment. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00598/21Safety recallFireno date · EU Safety Gate
Cracks could occur in the high pressure lines between the fuel rail and the injectors.
As a result, diesel fuel could leak into the engine compartment, increasing the risk of fire.
Moreover, due to the fuel leak the engine might not start, or the emergency operating mode might be activated.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00618/20Safety recallFireno date · EU Safety Gate
Moisture can penetrate into the busbar, giving rise to conductive contacts between the individual lines inside it. The resulting current flows could overheat the plastic material of the busbar, increasing the risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00901/22Safety recallFire, Injuriesno date · EU Safety Gate
The screw connection of the 48 V ground connector of the coolant electric compressor may come loose and lead to improper attachment of the ground line cable head. This increases the electrical contact resistance and can cause the temperature at the connection point to increase, increasing the risk of fire.
The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01237/22Safety recallFireno date · EU Safety Gate
The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet conditions and can lead to a short circuit, increasing the risk of a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01336/20Safety recallFire, Injuriesno date · EU Safety Gate
Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process.
In the event of a loose screw connection, oil might leak at the oil-supply and/or oil-return pipe of the turbocharger.
The leaking oil might then come into contact with hot components, increasing the risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01361/21Safety recallInjuriesno date · EU Safety Gate
The electrical connector of the side-impact sensors might not be correctly latched and could become detached.
This would lead to delayed activation of the restraint systems in the event of a side impact, reducing their restraining effect and increasing the risk of injury to the vehicle occupants.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01603/21Safety recallInjuriesno date · EU Safety Gate
The mounting screws of the disc brake callipers on the front axle may not be in line with specifications. As a result, when braking, a disc brake calliper may detach, increasing the risk of accidents. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0164/19Safety recallInjuriesno date · EU Safety Gate
There may be cracks in a securing nut in the steering gear of rear-wheel-drive vehicles. The nut could consequently break if the steering system is subject to a very high lateral force, which could result in rotating parts in the steering gear affecting the casing and thereby blocking the steering system.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01979/24Safety recallFireno date · EU Safety Gate
The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the connector when the vehicle is parked, causing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01980/24Safety recallInjuriesno date · EU Safety Gate
The software of the airbag control module may be faulty. In the event of an accident, this can lead the active bonnet system not to be activated properly. This increases the risk of injury to other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/02219/23Safety recallInjuriesno date · EU Safety Gate
The exit warning function, which warns car occupants not to open doors when traffic is approaching, may malfunction. This creates a risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0296/19Safety recallInjuriesno date · EU Safety Gate
In vehicles with rear-wheel drive, a lock nut in the steering gear may be cracked. Consequently, when the steering is placed under high forces it could break, which would block the steering gear and increase the risk of accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0783/19Safety recallInjuriesno date · EU Safety Gate
The riveting of the front seat belt housing covers may be inadequate under low temperatures (below -17.5°C). In the event of an accident, the rivets could fail and release the housing cover. This can result in a loss of the seat belt’s restraining effect, increasing the risk of injury.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/1130/19Safety recallFireno date · EU Safety Gate
The fixing screws for the turbocharger oil return line and the crankcase breather pipe may have been interchanged. Due to a screw being too long, the pre-tensioning force of the screw connection may be insufficient and oil could leak from the turbocharger oil return line. As a result, oil could come into contact with hot components, increasing the risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/1447/18Safety recallInjuriesno date · EU Safety Gate
The calibration of the occupant classification system for the passenger seat does not work correctly. If a child seat is installed on the passenger seat, the airbag might not be deactivated and be deployed in the event of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
