A12/01658/21Safety recallInjuries2 November 2021 · EU Safety Gate
In certain vehicles with a calliper disc-brake system, the bolts of the brake callipers on the front axle may not meet the specifications. A brake calliper can detach during braking, which may lead to braking power being reduced and components being lost. That would increase the potential risk of accidents, including for the following traffic. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Distributor
Category of measure(s): Recall of the product from end users
Date of entry into force: 02/11/2021
The authority's notice
A12/00045/22Safety recallFireno date · EU Safety Gate
The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/00463/24Safety recallEnvironment, Fireno date · EU Safety Gate
The 48V ground cable bolt in the engine compartment may be incorrectly secured. This could increase electrical transition resistance at the point of connection. As a result, the high electrical currents that can flow through this connection could increase the temperature, increasing the risk of fire. Furthermore, the 48V electrical power supply failure may increase exhaust emissions. This could have a negative impact on the environment. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/00901/22Safety recallFire, Injuriesno date · EU Safety Gate
The screw connection of the 48 V ground connector of the coolant electric compressor may come loose and lead to improper attachment of the ground line cable head. This increases the electrical contact resistance and can cause the temperature at the connection point to increase, increasing the risk of fire.
The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01603/21Safety recallInjuriesno date · EU Safety Gate
The mounting screws of the disc brake callipers on the front axle may not be in line with specifications. As a result, when braking, a disc brake calliper may detach, increasing the risk of accidents. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01980/24Safety recallInjuriesno date · EU Safety Gate
The software of the airbag control module may be faulty. In the event of an accident, this can lead the active bonnet system not to be activated properly. This increases the risk of injury to other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
