SR/03207/25Safety recallEnvironment6 August 2025 · EU Safety Gate
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits. The product does not comply with the Regulation on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 06/08/2025
The authority's notice
SR/02659/25Safety recallInjuries3 July 2025 · EU Safety Gate
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 03/07/2025
The authority's notice
A12/0986/19Safety recallEnvironment8 April 2019 · EU Safety Gate
The vehicles may have a higher diesel particulate rate than the specified rate. Higher emission of diesel particles causes global warming, acid rain, and harms the environment and human health.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 08/04/2019
The authority's notice
A12/00041/20Safety recallInjuriesno date · EU Safety Gate
The steering column has not been manufactured in accordance with the specification.
This can cause steering failure and, consequently, loss of control of the vehicle, increasing the risk of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/00135/21Safety recallInjuriesno date · EU Safety Gate
The wheel screws are not tightened with the required torque.
This could lead to a wheel being lost during driving, increasing the risk of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01161/20Safety recallInjuriesno date · EU Safety Gate
The track rods may be damaged when they are under load. This may result in a loss of driving stability, increasing the risk of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/0686/19Safety recallInjuriesno date · EU Safety Gate
Possible misalignment of the ratchet on the handbrake lever latching mechanism. As a result the handbrake may not engage or could disengage by itself, increasing the risk of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
