15V088000STRUCTURE:BODY:HOODSTRUCTURE:BODY:HOOD13 February 2015 · NHTSA (USA)
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain model year 2013-2015 E350 Sedan, E350 4Matic Sedan, E350 4Matic Station Wagon, E400 Hybrid Sedan, CLS 550 CGI, and CLS550 4Matic, 2013-2014 E550 4Matic Sedan, 2013 E63 Sedan, E63 Station Wagon and CLS63, 2014-2015 CLS63 4Matic, E63 4Matic Sedan, E63 4Matic Sedan "S", and E63 4Matic Station Wagon, 2015 CLS400, 2015 E400 Sedan, E400 4Matic Sedan and CLS400 4Matic and 2014 CLS63 "S". The affected vehicles have a rubber seal at the back of the engine bay that may temporarily stick to the hood when it is opened and then may fall into the engine bay when the hood is closed.
Risk: If the rubber seal falls into the engine compartment, it may contact parts of the exhaust system, increasing the risk of a fire.
Remedy: MBUSA will notify owners, and dealers will attach four additional retaining clips to the rubber seal, free of charge. The recall began March 6, 2015. Owners may contact MBUSA customer service at 1-201-573-5339. MBUSA's number for this recall is 2015020001.
The authority's notice
14V818000SEAT BELTS: REAR/OTHER:BUCKLE ASSEMBLYSEAT BELTS: REAR/OTHER:BUCKLE ASSEMBLY24 December 2014 · NHTSA (USA)
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain model year 2015 E250 Diesel, E250 Blue Tec 4 Matic, E350 Sedan, E350 Sedan 4 Matic, E350 Wagon 4 Matic, E400 Sedan, E400 Sedan 4 Matic, E63 Sedan, and E63 Wagon vehicles manufactured October 8, 2014, to October 24, 2014. In the affected vehicles, the double seat belt buckle for the middle position of the rear passenger seat could fail under loading experienced in a severe frontal crash.
Risk: If the middle position double seat belt buckle assembly fails under load such as in a severe frontal crash, there is an increased risk of injury to the seat occupant.
Remedy: MBUSA will notify owners, and dealers will replace the double seat belt buckle, free of charge. The recall began February 2, 2015. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2014120006.
The authority's notice
A12/00618/20Safety recallFireno date · EU Safety Gate
Moisture can penetrate into the busbar, giving rise to conductive contacts between the individual lines inside it. The resulting current flows could overheat the plastic material of the busbar, increasing the risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/0082/17Safety recallInjuriesno date · EU Safety Gate
The power-assisted steering control units may have been fitted with defectively welded contacts. As a result, a permanent electrical connection between the contacts cannot be guaranteed, which could lead to loss of support to the power-assisted steering and thus an increased risk of accidents.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01237/22Safety recallFireno date · EU Safety Gate
The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in wet conditions and can lead to a short circuit, increasing the risk of a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01448/22Safety recallEnvironment, Injuriesno date · EU Safety Gate
Faulty configurations of the control units (traction systems, signal recording triggering modules, engine control units and headlights) could cause one or more control units to malfunction, which could increase the risk of an accident. The exhaust emissions exceed the legal limits, posing a risk to the environment. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/0334/17Safety recallInjuriesno date · EU Safety Gate
The front passenger occupant detection control unit may have been incorrectly installed and could misclassify a passenger as a child seat. That would cause the front passenger airbag to be deactivated in the event of an accident and would thereby increase the risk of injury for the passenger.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
SR/03711/24Safety recallInjuriesno date · EU Safety Gate
The three aluminium screws of the steering box may corrode due to exposure to spray water and aggressive road-grit (salt) used for melting ice. Advanced corrosion could weaken the screws, leading to potential breakage during manoeuvring or parking. If all fixing screws fail, the power-assisted steering could detach, resulting in a loss of power steering and an increased risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice