A12/00149/21Safety recallFire, Injuriesno date · EU Safety Gate
The wiring harness for the steering control device may have been damaged during the production process and can allow moisture to ingress into the control unit.
This may lead to the loss of electric steering support, increasing the risk of accident.
Moreover, a short circuit of the damaged wiring harness can occur, leading to increased risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01105/20Safety recallInjuriesno date · EU Safety Gate
The left-hand side, rear seat-back lock does not comply with the specifications. This could lead to a failure of the seat-back locking system in the event of an accident, increasing the risk of injury.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01361/21Safety recallInjuriesno date · EU Safety Gate
The electrical connector of the side-impact sensors might not be correctly latched and could become detached.
This would lead to delayed activation of the restraint systems in the event of a side impact, reducing their restraining effect and increasing the risk of injury to the vehicle occupants.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01673/21Safety recallInjuriesno date · EU Safety Gate
Mercedes-Benz AG has found that, in certain EQC (BR 293) vehicles, the wiring harness for the electric steering may have been damaged during the assembly process. This could lead to an ingress of water into the wiring harness and thus, over time, into the steering control unit. As a result, the power steering could fail spontaneously, even during driving, increasing the risk of an accident. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice