24V611000STRUCTURE:FRAME AND MEMBERSSTRUCTURE:FRAME AND MEMBERS15 August 2024 · NHTSA (USA)
BMW of North America, LLC. (BMW) is recalling certain 2024 i4 eDrive40, xDrive40, and M50 vehicles. The left-side longitudinal beam may crack, compromising the structural integrity of the chassis.
Risk: Reduced structural integrity may result in damage to the high voltage battery during a crash, increasing the risk of fire.
Remedy: Dealers will inspect and replace the left-side longitudinal beam as necessary, free of charge. Owner notification letters were mailed October 14, 2024. Owners may contact BMW customer service at 1-800-525-7417.
The authority's notice
A12/00763/24Safety recallFireno date · EU Safety Gate
Due to incorrectly produced high-voltage cell modules, the cell terminal and the cell-contact system in the battery are not in contact anymore. When strong electricity is flowing, that may cause the cell to overheat and create a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01664/24Safety recallInjuriesno date · EU Safety Gate
The possible cracks in the rear side member may lead to structural failure of the body of the vehicle. This increases the risk of injury for vehicle occupants in the event of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
SR/01734/25Safety recallFireno date · EU Safety Gate
The positive battery cable of the starter-generator may not have been manufactured correctly. This could result in a loose electrical connection, leading to excessive contact resistance. The vehicle cannot charge or start. Contact points in the starter-generator could overheat and cause a vehicle fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
SR/02913/25Safety recallFireno date · EU Safety Gate
The cell modules in the vehicles concerned were not produced in accordance with the specifications, which may cause the module frame to fail. This may lead to a shutdown of the high-voltage system and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
