A11/00108/21Safety recallInjuries10 November 2021 · EU Safety Gate
During the process of assembling the rear stub axle housing at the supplier’s, it is possible that the attachment screw of the rear right or rear left stub axle housing was not tightened to the required torque. Friction noise may occur in the area of the rear axle during operation, which may be followed by loss of control of the vehicle when the stub axle housing comes loose, increasing the risk of an accident. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 10/11/2021
We could not check this: model year. The authority's notice
A12/01388/21Safety recallInjuries31 August 2021 · EU Safety Gate
Due to a manufacturing error, seat belt anchorage points for the front seats may be inadequate.
This will impair the seat belts' protective effect in the event of a collision or sudden braking, increase the risk of injury. The product does not meet the requirements set out in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 31/08/2021
We could not check this: model year. The authority's notice
A12/00697/22Safety recallFireno date · EU Safety Gate
In the event of a short circuit, a faulty fuse can cause an arc flash, which could cause fire and lead to an accident. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01328/22Safety recallInjuriesno date · EU Safety Gate
In the event of an accident, there is a risk that the load in the baggage compartment will shoot forwards to the partition grille and cause the bracket to detach from the body, increasing the risk of injury to the passengers.
The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/02618/23Safety recallInjuriesno date · EU Safety Gate
Improper heat treatment applied to engine mounts may cause them to break. This affects the stability of driving, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice