SR/00818/26Safety recallFire9 March 2026 · EU Safety Gate
The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient clearance and possible contact between these components can lead to water infiltration, causing an electric arc, that could trigger a thermal event, such as overheating, which may lead to fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 09/03/2026
The authority's notice
SR/03584/25Safety recallEnvironment29 September 2025 · EU Safety Gate
Due to incorrect coding in the Built-in Systems Interface, the Stop&Start function is inoperative, which may result in increased CO2 emissions. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 29/09/2025
The authority's notice
SR/02932/25Safety recallFire16 July 2025 · EU Safety Gate
The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 16/07/2025
The authority's notice
SR/02105/25Safety recallInjuries14 April 2025 · EU Safety Gate
The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the deactivation of stability control due to damage to the pressure sensor. The brake fluid could come into contact with the printed circuit board and result in the deactivation of all control functions (including the anti-lock system and electronic brake force distribution). The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 14/04/2025
The authority's notice
SR/00500/25Safety recallInjuries9 January 2025 · EU Safety Gate
Tyres may have been damaged during the final inspection of the brakes. This can reduce the area of the tyre in contact with the road or cause a tyre failure when in use. This can lead to a sudden loss of tyre pressure and/or a burst tyre, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 09/01/2025
The authority's notice
A12/02726/24Safety recallInjuries11 September 2024 · EU Safety Gate
A crack located inside the Electric Power Steering motor of the steering rack can cause plastic parts to detach from the worm wheel. This can lead to a steering blockage, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 11/09/2024
The authority's notice
