A12/00444/21Safety recallFireno date · EU Safety Gate
Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.
This may result in localised thermal damage in the intake system, which might lead to engine power reduction and to increased risk of fire.
Remedy: Type of economic operator taking notified measure(s): Importer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/0102/17Safety recallInjuriesno date · EU Safety Gate
The mixing ratio of the fire starter component may be incorrect in some initiators. As a result, the side airbag may not deploy.
Remedy: Type of economic operator taking notified measure(s): Importer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/0162/17Safety recallFire, Injuriesno date · EU Safety Gate
1. Incorrect fuel cap seal installation could lead to fuel leakage.
2. Incorrect front shock absorber to hub tightening could affect the vehicle handling.
3. The earth cable attachment point for the airbag control unit may not be properly tightened which could lead to the airbags malfunctioning.
4. The bolts holding the steering valve on the steering rack may be missing or incorrectly tightened which could affect the steering.
5. Incorrect tightening of one of the nuts fixing the brake pedal to the brake booster could lead to a sudden loss of brake assistance.
6. Water could leak into the cabin and reach the airbag module leading to unexpected airbag deployment.
7. Wheel bolt looseness could lead to the wheel detaching during driving.
Remedy: Type of economic operator taking notified measure(s): Importer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/1026/17Safety recallInjuriesno date · EU Safety Gate
The mounting for the air-conditioning compressor may not be securely attached and may break. The compressor could then become detached from the vehicle and fall into the road.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
SR/02942/25Safety recallInjuriesno date · EU Safety Gate
Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and increase the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Importer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
