A12/00868/23Safety recallInjuries30 March 2023 · EU Safety Gate
The airbag may deteriorate over time, and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 30/03/2023
We could not check this: model year. The authority's notice
A12/01930/23Safety recallInjuries29 June 2021 · EU Safety Gate
The propellant in the driver airbag can deteriorate due to high humidity and temperature variations. In the event of an accident in which the airbag deploys, this could result in fragments from the inflator casing coming loose and injuring the vehicle’s occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 29/06/2021
We could not check this: model year. The authority's notice
A12/1233/17Safety recallInjuries30 August 2017 · EU Safety Gate
The front safety belts may have a faulty locking mechanism.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 30/08/2017
We could not check this: model year. The authority's notice
12V161000ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGERENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER10 April 2012 · NHTSA (USA)
BMW IS RECALLING CERTAIN MODEL YEAR 2011 5-SERIES, 5-SERIES GRAN TURISMO, MODEL YEAR 2012 6-SERIES CONVERTIBLE, 7-SERIES, X5 SAV, AND X6 SAV VEHICLES EQUIPPED WITH 8- OR 12-CYLINDER, TURBOCHARGED, ENGINES BECAUSE THE CIRCUIT BOARD FOR THE ELECTRIC AUXILIARY WATER PUMP CAN OVERHEAT.
Risk: THIS COULD LEAD TO A SMOLDERING OF THE PUMP OR AN ENGINE COMPARTMENT OR VEHICLE FIRE.
Remedy: BMW WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE AUXILIARY WATER PUMP FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 30, 2012. OWNERS MAY CONTACT BMW CUSTOMER RELATIONS AND SERVICES AT 1-800-525-7417.
We could not check this: model year. The authority's notice
A12/00068/19Safety recallInjuriesno date · EU Safety Gate
The press-in force of the counterbalance shaft’s bearing shells may not have met the specifications, which could cause the counterbalance shaft to become loose. As a result, the engine could be damaged and locked in motion, increasing the risk of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0036/17Safety recallInjuriesno date · EU Safety Gate
The side, head and knee protection airbags of the front passenger seat may not work. This could increase the risk of injury to the occupant in the event of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00783/23Safety recallInjuriesno date · EU Safety Gate
The airbag propellant may deteriorate over time, and If deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01981/24Safety recallInjuriesno date · EU Safety Gate
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0202/17Safety recallInjuriesno date · EU Safety Gate
The universal joint of the drive shaft might break, causing a sudden loss of propulsion.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/02573/24Safety recallInjuriesno date · EU Safety Gate
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/02833/24Safety recallInjuriesno date · EU Safety Gate
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/1147/17Safety recallInjuriesno date · EU Safety Gate
The bolt on the outside of the seat mechanism of both front seats may not have been properly secured. If the bolt comes loose, the seat can move backwards in the event of a rear-end collision accident, which would increase the risk of injury to the occupants.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/1346/17Safety recallInjuriesno date · EU Safety Gate
A component of the steering mechanism might not have been fitted correctly. This might lead to considerably increased steering force being required or to a loss of steering control.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
SR/03830/25Safety recallFireno date · EU Safety Gate
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice