A12/01220/21Safety recallEnvironment23 April 2021 · EU Safety Gate
The vehicles are equipped with control software regarded as unauthorised by the competent authorities. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Importer
Category of measure(s): Recall of the product from end users
Date of entry into force: 23/04/2021
We could not check this: model year. The authority's notice
A12/00504/22Safety recallInjuriesno date · EU Safety Gate
Alteration of the rear axle’s toe and/or camber values lead to increased and uneven wear on the rear tyres, and if worn down to its carcass may suffer a sudden loss of pressure. This can lead to loss of traction and may affect vehicle handling, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00689/20Safety recallFireno date · EU Safety Gate
Moisture can penetrate into the belt starter generator.
This can result in a short circuit, leading to local overheating and increased risk of fire.
Due to the permanent power supply of the starter generator, this can occur when the vehicle has already been parked for a while.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00752/21Safety recallInjuriesno date · EU Safety Gate
The vehicles may be fitted with a towbar with a swivel mechanism that may have a defective locking pin.
As a result, the pin could break while driving, increasing the risk of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01401/20Safety recallFireno date · EU Safety Gate
Moisture can ingress into the belt starter generator, generating short-circuits.
This can lead to local overheating of the component, increasing risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01482/20Safety recallInjuriesno date · EU Safety Gate
The screw connection attaching the seat frame to the seat rail may not be correctly executed. As a result, it may fail in the event of an accident, increasing the risk of injury.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0226/19Safety recallInjuriesno date · EU Safety Gate
The screw fitting the passenger airbag module to the instrument panel may not have been correctly tightened. This could have an impact on the inflation of the airbag and thus the protection of the occupant.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/03031/23Safety recallInjuriesno date · EU Safety Gate
A defective welding seam on the front seat back frame can break in the event of an accident. As a result, the person sitting in the seat may hit their head on the B-pillar, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0333/17Safety recallInjuriesno date · EU Safety Gate
Differences in the mixture ratio for the initiating devices for the airbags or seat-belt pre-tensioners could lead to the airbags or seat-belt pre-tensioners not activating in the event of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0382/19Safety recallFireno date · EU Safety Gate
In certain vehicles, fuel can leak onto the engine fuel rail. Fuel leakage close to a source of ignition may increase the risk of the vehicle catching fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0650/18Safety recallInjuriesno date · EU Safety Gate
The adhesive attaching the windscreen is not sufficiently secure. In the event of an accident, the protective effect of the passenger airbag could be compromised.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0698/17Safety recallInjuriesno date · EU Safety Gate
The micro gas generator of the rear seat-belt pre-tensioners may be incorrectly installed. As a result, in the event of an accident, it can come loose and parts may inadvertently enter the passenger compartment, causing injuries.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0713/17Safety recallFireno date · EU Safety Gate
The additional coolant pump can block due to foreign particles in the cooling system. This can result in the pump overheating which could lead to a fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0718/18Safety recallInjuriesno date · EU Safety Gate
Decorative aluminium strips on the lower part of the front or rear door trims may become partly detached. The sharp ends of the strips could cause injuries.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0942/18Safety recallFireno date · EU Safety Gate
The auxiliary coolant pump may seize up. This could lead to the pump overheating after the engine has been switched off with the risk that the vehicle could catch fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/1516/19Safety recallInjuriesno date · EU Safety Gate
A damaged transistor may have been installed in the airbag control unit. Consequently, it may not properly make contact leading to the passenger airbag not to be triggered in the event of an accident, increasing the risk of injuries.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
INFO/00138/21Safety recallInjuriesno date · EU Safety Gate
The nuts on the eccentric bolt of the rear-axle spring-link control arm may break due to stress corrosion.
As a result, the rear axle could move in the wrong direction, in an uncontrollable manner at high speeds.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
SR/01902/25Safety recallInjuriesno date · EU Safety Gate
Due to an improperly welded joint, the rear seat back may not meet crash safety requirements. In a frontal collision, there is an increased risk of injury to rear-seat passengers if a heavy load is being transported in the boot. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
