22V107000FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: RADARFORWARD COLLISION AVOIDANCE: SENSING SYSTEM: RADAR24 February 2022 · NHTSA (USA)
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2021 C-HR vehicles. The radar sensor may not have been activated during production, making the pre-collision system (PCS) inoperative.
Risk: An inoperative PCS that does not provide a malfunction indicator to the driver, or braking assist as expected, can increase the risk of a crash.
Remedy: Dealers will inspect and activate the radar sensor as necessary, free of charge. Owner notification letters were mailed April 22, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA02.
We could not check this: model year. The authority's notice
A12/01416/20Safety recallInjuries9 June 2020 · EU Safety Gate
The front right-hand axle shafts may have been produced with lower material strength.
If an affected vehicle is frequently driven under certain conditions where higher torque is applied to the front axle shafts, such as rapid acceleration when starting, the shaft may break, leading to loss of driving force and increased the risk of an accident.
Remedy: Type of economic operator taking notified measure(s): Importer
Category of measure(s): Recall of the product from end users
Date of entry into force: 09/06/2020
We could not check this: model year. The authority's notice
A12/00469/22Safety recallInjuriesno date · EU Safety Gate
The radar sensor may malfunction due to a faulty installation. This can result in a failure to detect a vehicle in front through the PCS (pre-collision system), which will not provide warnings or brake assistance and the vehicle will not show the driver a message or indicator that the PCS is not working. This may increase the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Importer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00946/21Safety recallInjuriesno date · EU Safety Gate
The resistance characteristics of the fuel pump components against high fuel pressure may be inadequate.
As a result, cracks may be formed on the welded parts of the pump and a fuel leak may occur, posing a risk to the following traffic. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Importer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/02637/23Safety recallFireno date · EU Safety Gate
Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in increased stress on valves and/or movement valve seat inside the pump body. This increased stress can cause a crack in the weld of the affected valves, which could lead to a fuel leak, increasing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Importer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
