SR/01626/26Safety recallInjuries18 May 2026 · EU Safety Gate
The wheel bolts were not tightened in accordance with the torque specifications. The bolts and the wheel assembly could detach while the vehicle is in motion, increasing the risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 18/05/2026
The authority's notice
A12/00940/24Safety recallInjuriesno date · EU Safety Gate
The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Update of the electric steering software
Date of entry into force: Unknown
Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/02969/24Safety recallInjuriesno date · EU Safety Gate
The pyrofuse casing may move while the vehicle is in motion, potentially damaging cables. As a result, the pyrofuse could fail during an accident or cause the separator piston to dislodge into the driver’s footwell, increasing the risk of injury. Additionally, in plug-in hybrid and electric vehicles, cable damage could lead to high-voltage system failure and loss of power without warning, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
SR/00883/25Safety recallFireno date · EU Safety Gate
A gasket is lacking between the exhaust manifold and the exhaust gas turbocharger. This can lead to hot, unpurified exhaust gas seeping out between the turbocharger and the manifold. This can damage the cylinder head cover and cause an oil leak. If the oil come into contact with hot engine parts, the vehicle can catch fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
SR/02420/25Safety recallInjuriesno date · EU Safety Gate
The length of the brake hoses on the rear axle is incorrect. The rear axle’s brake hoses can come into contact with surrounding components, chafe over time, and leak brake fluid. This can lead to reduced braking performance in one of the two brake circuits and increase the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
SR/04146/25Safety recallInjuriesno date · EU Safety Gate
The driver/passenger seat belt buckles may not meet the specifications. As a result, the seat belt may not provide sufficient protection in the event of a frontal impact, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
SR/04170/25Safety recallFire, Injuriesno date · EU Safety Gate
The wiring harness near the “D” pillar may be damaged by adjacent components. This can disable the window bag, reducing occupant protection in a crash. The damage may also increase electrical resistance, creating a potential hotspot and a possible fire risk. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
