19V868000AIR BAGS:FRONTALAIR BAGS:FRONTAL6 December 2019 · NHTSA (USA)
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2019 E53 AMG 4MATIC, E63 AMG 4MATIC Wagon, and E63S AMG 4MATIC Wagon vehicles. The incorrect driver air bag and software version may have been installed.
Risk: Incorrect driver air bag and software version can cause the restraint systems to not function as intended during a crash, increasing the risk of injury.
Remedy: MBUSA will notify owners, and dealers will inspect and, as necessary, replace the driver's air bag and update the air bag software, free of charge. The recall began April 16, 2020. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2020030001/2.
The authority's notice
19V676000STRUCTURE:BODYSTRUCTURE:BODY23 September 2019 · NHTSA (USA)
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2019 E450 4MATIC Wagon, 2017-2018 E400 4MATIC Wagon, and 2018-2019 E63S 4MATIC Wagon vehicles. The rear spoiler may detach.
Risk: If the spoiler detaches while driving, it can become a road hazard, increasing the risk of a crash.
Remedy: MBUSA will notify owners, and dealers will inspect and correct the mounting of the spoiler, as necessary, free of charge. The recall began October 18, 2019. Owners may contact MBUSA customer service at 1-800-367-6372. Note: This recall is an expansion of NHTSA recall number 18V-849. MBUSA's number for this recall is 2019090008.
The authority's notice
18V849000STRUCTURE:BODYSTRUCTURE:BODY29 November 2018 · NHTSA (USA)
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2019 Mercedes-Benz E450 4Matic Wagon and E63S AMG Wagon vehicles. The affected vehicles have a tailgate mounted spoiler that may not be properly attached and therefore could detach while driving.
Risk: If the tailgate mounted spoiler detaches while driving, it can become a road hazard, increasing the risk of a crash.
Remedy: MBUSA will notify owners, and dealers will inspect and correct the mounting of the spoiler, as necessary, free of charge. The recall began December 19, 2018. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2018120002.
The authority's notice
A12/00017/22Safety recallFireno date · EU Safety Gate
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment.
Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/00045/22Safety recallFireno date · EU Safety Gate
The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/00618/20Safety recallFireno date · EU Safety Gate
Moisture can penetrate into the busbar, giving rise to conductive contacts between the individual lines inside it. The resulting current flows could overheat the plastic material of the busbar, increasing the risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/00773/21Safety recallFire, Injuriesno date · EU Safety Gate
Due to a defective screw connection, the starter motor positive cable may become damaged by the relative movements of the starter.
Consequently, the cable could come into contact with the housing of the starter and cause a short circuit, which could lead to an engine stall and increased risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/00850/20Safety recallInjuriesno date · EU Safety Gate
The seat belt on the left-hand front seat may not have been fitted correctly and can be damaged by coming into contact with sharp-edged metal parts.
This will impair its restraint function, increasing the risk of injury in the event of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/00968/22Safety recallInjuriesno date · EU Safety Gate
Due to a defect in the high fuel pressure manifold the engine might be damaged. This may lead to reduced engine power and to inability to start the vehicle, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Importer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/00974/20Safety recallFireno date · EU Safety Gate
The heat shielding plate on the exhaust gas turbocharger may not comply with the specifications. As a result, it can come into contact with the oil pipe of the turbocharger and damage it, leading to increased risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01046/20Safety recallFireno date · EU Safety Gate
The elastomer material of the oil feed line for the exhaust-gas turbocharger may not comply with the specification, allowing oil to leak out.
Consequently, the leaking oil could come into contact with hot components, increasing the risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01336/20Safety recallFire, Injuriesno date · EU Safety Gate
Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process.
In the event of a loose screw connection, oil might leak at the oil-supply and/or oil-return pipe of the turbocharger.
The leaking oil might then come into contact with hot components, increasing the risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01532/21Safety recallInjuriesno date · EU Safety Gate
The belt tensioner arm may have been manufactured with a borderline tolerance, which could cause one side of the V-ribbed belt to rub against the belt tensioner, causing it to fail.
As a result, the coolant pump may stop working, causing the engine to overheat, thus compromising the impermeability of the oil sump. Consequently, oil may leak onto the road, posing a risk to the following traffic. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01979/24Safety recallFireno date · EU Safety Gate
The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the connector when the vehicle is parked, causing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/1130/19Safety recallFireno date · EU Safety Gate
The fixing screws for the turbocharger oil return line and the crankcase breather pipe may have been interchanged. Due to a screw being too long, the pre-tensioning force of the screw connection may be insufficient and oil could leak from the turbocharger oil return line. As a result, oil could come into contact with hot components, increasing the risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/1753/19Safety recallInjuriesno date · EU Safety Gate
The rear spoiler might not have been attached in accordance with requirements. As a result, the rear spoiler could become completely detached from the vehicle at high speeds, posing a risk to the following traffic.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
INFO/00139/21Safety recallInjuriesno date · EU Safety Gate
The software and hardware of the parking assistance system may be defective. This could lead to the rear camera view being impeded or failing completely. Moreover, the ultrasonic parking sensors might not detect an obstacle or not detect it correctly, leading to increased risk of an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
