Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: 03/07/2025

The authority's notice

Due to an error in the specific calibration software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions that are above the regulatory limits. Excessive NOx emissions pose a risk to the environment. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: 07/12/2023

The authority's notice

The loading capacity of the rear tyres is lower than its maximum permitted load. This could lead to a loss of control over the vehicle, creating a risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: 05/05/2023

The authority's notice

In some braking situations the Controller Area Network (CAN) system might send erroneously a CAN signal “invalid value” for vacuum pressure in booster. This deactivates thee Hydraulic Brake compensation, causing a brake vacuum loss that can lead to reduced braking performance. This increases the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Importer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The safety function (charge pin temperature sensor) of the charging cable may fail and not prevent the cable from overheating, creating a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The high-pressure fuel pump and the timing belt of the engine may malfunction, which can lead to an engine breakdown/stalling while driving, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Importer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A software error in the Engine Control Unit prevents the Malfunction Indicator Light (MIL) from activating if the urea injection system urea injector stops working. This may result in higher emissions and poses a risk to the environment. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Importer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Due to an error in the software calibrations of the traction high voltage battery control unit, a false detection of the battery cell voltage and/or the battery temperature can occur. This can lead the failsafe system to cut the motor power to prevent any damage to the battery, causing a loss of drive. This can increase the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Importer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

The indirect tyre pressure monitoring system (iTPMS) may fail to activate the low tyre pressure warning at the required minimum threshold due to incorrect calibration in the Electronic Stability Control (ESC) software. This can result in the warning light not illuminating, illuminating with a delay, or triggering a false warning. In the event of under-inflated tyres, this could increase the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Importer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice