A12/01220/21Safety recallEnvironment23 April 2021 · EU Safety Gate
The vehicles are equipped with control software regarded as unauthorised by the competent authorities. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Importer
Category of measure(s): Recall of the product from end users
Date of entry into force: 23/04/2021
We could not check this: model year. The authority's notice
A12/00278/20Safety recallInjuriesno date · EU Safety Gate
Due to defects in the manufacturing process, the rear wheelhouse trims may not have been adequately clipped to the bodywork. As a result, they may become detached, posing a risk to the following traffic.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00504/22Safety recallInjuriesno date · EU Safety Gate
Alteration of the rear axle’s toe and/or camber values lead to increased and uneven wear on the rear tyres, and if worn down to its carcass may suffer a sudden loss of pressure. This can lead to loss of traction and may affect vehicle handling, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/00689/20Safety recallFireno date · EU Safety Gate
Moisture can penetrate into the belt starter generator.
This can result in a short circuit, leading to local overheating and increased risk of fire.
Due to the permanent power supply of the starter generator, this can occur when the vehicle has already been parked for a while.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01340/20Safety recallInjuriesno date · EU Safety Gate
Due to a manufacturing error, the adjustment mechanism on the backrest frame of the front seat may be faulty or incorrectly welded. As a result, the stability of the seat back and its restraining effect in the event of a rear-impact collision may be impaired, increasing the risk of injury.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/01401/20Safety recallFireno date · EU Safety Gate
Moisture can ingress into the belt starter generator, generating short-circuits.
This can lead to local overheating of the component, increasing risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0835/19Safety recallInjuriesno date · EU Safety Gate
The master brake cylinder's wall may not be thick enough and the cylinder may develop a leak or fail to work. This may cause a failure of the hydraulic braking system, potentially leading to an accident.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0993/18Safety recallInjuriesno date · EU Safety Gate
The individual pistons on the rear wheel brake may not work as required. This could lead to a delayed brake performance, increasing the risk of accidents.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/1077/19Safety recallInjuriesno date · EU Safety Gate
The wheelhouse trims may not have been adequately attached to the vehicle. As a result, the wheelhouse trims could detach in motion, posing risk for the following traffic.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/1328/19Safety recallInjuriesno date · EU Safety Gate
During the production of the instrument panel, the welding of a joint may not have been executed in line with the specifications in the area where the passenger airbag is attached to the control panel. As a result, the airbag may be damaged during deployment, reducing its protective capacity and increasing the risk of an injury.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
INFO/00138/21Safety recallInjuriesno date · EU Safety Gate
The nuts on the eccentric bolt of the rear-axle spring-link control arm may break due to stress corrosion.
As a result, the rear axle could move in the wrong direction, in an uncontrollable manner at high speeds.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
SR/00268/25Safety recallFireno date · EU Safety Gate
During the charging process, the high/voltage battery may overheat due to a defect in the battery modules. This can result in a fire and cause injuries to occupants and bystanders. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
SR/03985/25Safety recallFireno date · EU Safety Gate
The high-voltage battery’s cell modules could overheat during charging. This may lead to fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
SR/03987/25Safety recallFireno date · EU Safety Gate
Divergent torques during the bolting process may cause the cylinder head cover bolts to loosen. Motor oil may come out of the cylinder head cover bolt holes, come into contact with hot parts of the engine, and thereby generate smoke or cause a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
