vinkodex.

Audi Q5 FY common faults.

2017–2024. The fault list covers this generation and the engines in it. If the listing gives the exact version, pick it below.

Audi Q5 FY

Steinfeld-feld / CC BY-SA 4.0

What to watch for

What can go wrong on this car?

The list covers the generation, the engines and the transmissions. Once you pick the version, only the faults that apply to it stay.

critical3

expensive5

7 more faults belong to this generation. On the version page, only the ones that apply stay.

Official recall14 recallsShow

The manufacturer fixes these for free at a franchised dealer. Ask with the VIN whether it was done. The list covers the whole generation. We did not filter it by model year. Some apply only to a narrower production window.

Most recent: 23 April 2021

A12/01220/21Safety recallEnvironment23 April 2021 · EU Safety Gate

The vehicles are equipped with control software regarded as unauthorised by the competent authorities. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Importer Category of measure(s): Recall of the product from end users Date of entry into force: 23/04/2021

The authority's notice

A12/00278/20Safety recallInjuriesno date · EU Safety Gate

Due to defects in the manufacturing process, the rear wheelhouse trims may not have been adequately clipped to the bodywork. As a result, they may become detached, posing a risk to the following traffic.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A12/00504/22Safety recallInjuriesno date · EU Safety Gate

Alteration of the rear axle’s toe and/or camber values lead to increased and uneven wear on the rear tyres, and if worn down to its carcass may suffer a sudden loss of pressure. This can lead to loss of traction and may affect vehicle handling, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A12/00689/20Safety recallFireno date · EU Safety Gate

Moisture can penetrate into the belt starter generator. This can result in a short circuit, leading to local overheating and increased risk of fire. Due to the permanent power supply of the starter generator, this can occur when the vehicle has already been parked for a while.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A12/01340/20Safety recallInjuriesno date · EU Safety Gate

Due to a manufacturing error, the adjustment mechanism on the backrest frame of the front seat may be faulty or incorrectly welded. As a result, the stability of the seat back and its restraining effect in the event of a rear-impact collision may be impaired, increasing the risk of injury.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A12/01401/20Safety recallFireno date · EU Safety Gate

Moisture can ingress into the belt starter generator, generating short-circuits. This can lead to local overheating of the component, increasing risk of fire.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A12/0835/19Safety recallInjuriesno date · EU Safety Gate

The master brake cylinder's wall may not be thick enough and the cylinder may develop a leak or fail to work. This may cause a failure of the hydraulic braking system, potentially leading to an accident.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A12/0993/18Safety recallInjuriesno date · EU Safety Gate

The individual pistons on the rear wheel brake may not work as required. This could lead to a delayed brake performance, increasing the risk of accidents.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A12/1077/19Safety recallInjuriesno date · EU Safety Gate

The wheelhouse trims may not have been adequately attached to the vehicle. As a result, the wheelhouse trims could detach in motion, posing risk for the following traffic.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

A12/1328/19Safety recallInjuriesno date · EU Safety Gate

During the production of the instrument panel, the welding of a joint may not have been executed in line with the specifications in the area where the passenger airbag is attached to the control panel. As a result, the airbag may be damaged during deployment, reducing its protective capacity and increasing the risk of an injury.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

INFO/00138/21Safety recallInjuriesno date · EU Safety Gate

The nuts on the eccentric bolt of the rear-axle spring-link control arm may break due to stress corrosion. As a result, the rear axle could move in the wrong direction, in an uncontrollable manner at high speeds.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

SR/00268/25Safety recallFireno date · EU Safety Gate

During the charging process, the high/voltage battery may overheat due to a defect in the battery modules. This can result in a fire and cause injuries to occupants and bystanders. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

SR/03985/25Safety recallFireno date · EU Safety Gate

The high-voltage battery’s cell modules could overheat during charging. This may lead to fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

SR/03987/25Safety recallFireno date · EU Safety Gate

Divergent torques during the bolting process may cause the cylinder head cover bolts to loosen. Motor oil may come out of the cylinder head cover bolt holes, come into contact with hot parts of the engine, and thereby generate smoke or cause a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Remedy: Type of economic operator taking notified measure(s): Manufacturer Category of measure(s): Recall of the product from end users Date of entry into force: Unknown

The authority's notice

Engines and transmissions in this generation

A fault is often tied to the engine, not to the whole generation. You find the engine code in the registration document.

FY · 2017–2024

Pick the version.

The fault list opens on the version page.

49 versions

Neighbouring generations

FY · 2017–2024

FY (2017-2024). If the listing is from the changeover year, look at the neighbour too.

Previous generation

8R · 2008–2017

This generation

FY · 2017–2024

Next generation

GU · 2024–

Common questions

About this generation

Which years does this page cover?

2017–2024. The changeover year can fall in two generations. If the listing is from that year, look at the neighbour too.

Does the fault apply to every car like this?

No. It depends on the engine and the transmission too.

Is it free?

The fault list is.

Information, not an expert opinion

We write the descriptions, and we put the source next to them. A person reviews them before they go out. They are still information, not a technical expert opinion.

  • A fault on the list does not mean the car you are looking at has it.
  • A fault missing from the list does not mean the model is fault-free. Write-ups are made model by model. Not all of them are done.
  • You decide whether to buy. This is no substitute for an inspection. That needs a workshop and a history check.
Details in the terms