23V842000ELECTRICAL SYSTEM:PROPULSION SYSTEM:CHARGING:CABLE/CORD:ONBOARDELECTRICAL SYSTEM:PROPULSION SYSTEM:CHARGING:CABLE/CORD:ONBOARD13 December 2023 · NHTSA (USA)
Volkswagen Group of America, Inc. (Audi) is recalling certain 2022-2024 RS e-tron GT, e-tron GT, Q4 e-tron Sportback, Q4 e-tron, 2020-2021 Audi A8, 2019-2024 e-tron Quattro, 2020-2024 e-tron Sportback Quattro, Q5, and 2021-2022 A7 vehicles. When using the industrial 220V/240V plug at the 100% charge setting, some home power outlets may be incapable of handling the electrical current required to utilize the compact charging system, causing the outlet or charging cable to overheat.
Risk: An overheated outlet or charging cable can increase the risk of a fire.
Remedy: Owners are advised not to use the 220V/240V compact/portable charging cable and only use the 110V home charging cable or public charging stations. Dealers will supply a new 220V/240V compact/portable charging cable with an incorporated temperature sensor, free of charge. Owner notification letters were mailed on March 28, 2024. Owners may contact Audi customer service at 1-800-253-2834. Audi's numbers for this recall are 93U6 and 93U8.
The authority's notice
21V947000ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCMELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM8 December 2021 · NHTSA (USA)
Volkswagen Group of America, Inc. (Audi) is recalling certain 2021-2022 Q5 Sportback, SQ5 Sportback, 2018-2022 Q5, and SQ5 vehicles. A liquid spill in the rear seat, or water ingress from an insufficient body seam underneath the vehicle may allow liquid to penetrate the gateway control module, causing it to shutdown.
Risk: A gateway control module shutdown will suddenly reduce engine power, increasing the risk of a crash.
Remedy: Dealers will install a protective cover on the gateway control module and seal an underbody seam as necessary, free of charge. Owner notification letters were mailed January 21, 2022. Owners may contact Audi customer service at 1-800-253-2834. Audi's number for this recall is 90S9.
The authority's notice
19V737000STRUCTURE:BODYSTRUCTURE:BODY16 October 2019 · NHTSA (USA)
Volkswagen Group of America, Inc. (Audi) is recalling certain 2018-2019 Audi SQ5 and 2018-2020 Audi Q5 vehicles. The rear wheel arch cover trim may loosen and detach from the vehicle.
Risk: The detached trim may become a road hazard, increasing the risk of crash.
Remedy: Audi will notify owners, and dealers will replace the four clips securing the forward part of the rear wheel arch trim, free of charge. The recall began November 1, 2019. Owners may contact Audi customer service at 1-800-253-2834. Audi's number for this recall is 66K8.
The authority's notice
A12/00504/22Safety recallInjuriesno date · EU Safety Gate
Alteration of the rear axle’s toe and/or camber values lead to increased and uneven wear on the rear tyres, and if worn down to its carcass may suffer a sudden loss of pressure. This can lead to loss of traction and may affect vehicle handling, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/00689/20Safety recallFireno date · EU Safety Gate
Moisture can penetrate into the belt starter generator.
This can result in a short circuit, leading to local overheating and increased risk of fire.
Due to the permanent power supply of the starter generator, this can occur when the vehicle has already been parked for a while.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01340/20Safety recallInjuriesno date · EU Safety Gate
Due to a manufacturing error, the adjustment mechanism on the backrest frame of the front seat may be faulty or incorrectly welded. As a result, the stability of the seat back and its restraining effect in the event of a rear-impact collision may be impaired, increasing the risk of injury.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
A12/01401/20Safety recallFireno date · EU Safety Gate
Moisture can ingress into the belt starter generator, generating short-circuits.
This can lead to local overheating of the component, increasing risk of fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
INFO/00138/21Safety recallInjuriesno date · EU Safety Gate
The nuts on the eccentric bolt of the rear-axle spring-link control arm may break due to stress corrosion.
As a result, the rear axle could move in the wrong direction, in an uncontrollable manner at high speeds.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
SR/03985/25Safety recallFireno date · EU Safety Gate
The high-voltage battery’s cell modules could overheat during charging. This may lead to fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice
SR/03987/25Safety recallFireno date · EU Safety Gate
Divergent torques during the bolting process may cause the cylinder head cover bolts to loosen. Motor oil may come out of the cylinder head cover bolt holes, come into contact with hot parts of the engine, and thereby generate smoke or cause a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
The authority's notice