On this engine the injectors were also listed as parts to be replaced in the maker's own programme, which means their failure is a known one. A faulty injector puts too much fuel into the cylinder. The liquid cannot be compressed, so the piston hits it on its way up: this is hydraulic lock, and it can damage the connecting rod bearing and the connecting rod as well. The early sign is rough running and hard starting. The fault can start from 60,000 km. The maker ran a separate programme for this engine, called the Customer Care Package, from December 2014. The franchised dealers had to check seven parts: the timing chain, the fuel injectors, the mass air flow sensor, the crankcase vent lines, the battery, the vacuum pump and the low pressure fuel sensor. These had to be replaced free of charge, even if the car had already fallen out of the four-year, 50,000-mile warranty. The same programme also shortened the oil change interval: 10,000 miles or one year instead of 15,000 miles or two years. Before buying it is therefore worth asking whether this programme was carried out on the car.
What to check
- Ask whether the Customer Care Package was carried out, and whether the injectors were replaced
- Start the engine cold and watch for hard starting and rough running
- Read the fault memory and look for a code reporting a misfire on a specific cylinder