SR/02979/25Safety recallInjuries4 August 2025 · EU Safety Gate
The structure of the airbag can deteriorate. If the airbags deploy, it could result in fragments from the inflator, injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 04/08/2025
Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Request to stop driving
Date of entry into force: 04/08/2025
We could not check this: model year. The authority's notice
A12/01581/24Safety recallInjuries1 December 2023 · EU Safety Gate
The propellant used in the driver airbag inflator can degrade when exposed to very high temperatures and levels of humidity. If activated after an impact, excessive internal pressure may cause the inflator to burst, and metal fragments could pass through the cushion material causing injury to occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: 01/12/2023
We could not check this: model year. The authority's notice
A12/00381/22Safety recallInjuriesno date · EU Safety Gate
A defect in the gas generator of the driver airbag can lead to uncontrolled inflation and the release of metal fragments when the airbag is activated. This defect may increase the risk of injuries in the event of an accident. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0183/19Safety recallFireno date · EU Safety Gate
There is a defective regulator on the blower motor. This can cause a fire in the cable set.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/0924/19Safety recallFireno date · EU Safety Gate
A pin contact on the fan motor resistor may melt. This can increase the risk of the vehicle catching fire.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
A12/1333/19Safety recallInjuriesno date · EU Safety Gate
As a result of a manufacturing error, the roof rail is not sufficiently strong. In the event of a rear collision, any objects secured there could fall from the vehicle and end up on the road, posing a risk to the following traffic.
Remedy: Type of economic operator taking notified measure(s): Manufacturer
Category of measure(s): Recall of the product from end users
Date of entry into force: Unknown
We could not check this: model year. The authority's notice
